Engine Oil Pressure
Minimum oil pressure at low idle with a temperature of 18 to 20°C (64 to 68°F) ... 62 kPa (9 psi)
Maximum oil pressure at high idle and at normal operating temperature
- 3003 engine ... 262 to 359 kPa (38 to 52 psi)
- 3013 engine ... 262 to 359 kPa (38 to 52 psi)
- 3014 engine ... 262 to 359 kPa (38 to 52 psi)
- 3024 engine ... 352 to 448 kPa (51 to 64 psi)
Caterpillar Information System:
M315 Excavator Machine System Boom - 5.05 m (16.568 ft)
315B Excavator Machine Systems Track Carrier Roller - Assemble
307B Excavator Offset Boom Control - If Equipped
330B Excavator Hydraulic System Operational Checks
M312 Excavator Machine System Pilot Control Valve (Auxiliary)
M318 and M320 Excavators Machine System Specifications Check Valve (Stick Drift Reduction)
5130B Excavator Hydraulic System Operational Checks
M312 Excavator Machine System Solenoid Valve
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Plate Locations and Film Locations
3412 Generator Set Engines Cylinder Block
330B Excavator Hydraulic System Relief Valve (Travel Motor) - Test and Adjust
M312 Excavator Machine System Relief Valve (Line)
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
M312 Excavator Machine System Lines (Boom Lowering Valve)
315B Excavator Machine Systems Track Roller - Remove
307B Excavator Shipping Specifications - One-Piece Boom
M312 Excavator Machine System Control Valve (Stick Lowering)
315B L Excavator Joystick Controls
3412 Generator Set Engines Cylinder Liner
315B Excavator Machine Systems Track Roller - Install
315B Excavator Machine Systems Track Roller - Disassemble
M312 Excavator Machine System Bucket Linkage - Retention
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Install
315B Excavator Machine Systems Track Roller - Assemble