Boom - 5.05 m (16.568 ft)
Show/hide table
Illustration 1 | g03322451 |
Show/hide table
Specification for 118-5324 Boom     | |||
Item     | Qty     | Part     | Specification Description     |
-     | All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the stick , upper frame, the bushing, and the cylinder pin bores.     | ||
1     | 2     | 096-0854 Lip Type Seal     | Lubricate lightly with the lubricant that is being sealed.     |
2     | 2     | 137-2919 Bushing     | Bore before assembly is 80.250 to 80.335 mm (3.1594 to 3.1628 inch).     |
Installation depth is 7.0 ± 0.5 mm (0.28 ± 0.02 inch) |
|||
3     | 6     | 8T-4956 Bolt     | Torque to 100 ± 20 N·m (74 ± 15 lb ft).     |
4     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2425 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 129-6158 Shim     | Thickness is 1.5 mm (0.06 inch).     |
|
5     | 2     | 8T-4780 Bolt     | Torque to 325 ± 40 N·m (240 ± 30 lb ft).     |
6     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2424 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0118 Shim     | Thickness is 2.0 mm (0.08 inch).     |
|
7     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2717 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0097 Shim     | Thickness is 2.0 mm (0.08 inch).     |
|
8     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 093-0086 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
1 | 7Y-2496 Shim     | Thickness is 1.6 mm (0.06 inch).     |
|
9     | 1     | 172-5853 Pin As     | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch).     |
10     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 093-0065 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
1 | 099-7091 Shim     | Thickness is 1.5 mm (0.06 inch).     |
|
11     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 129-6158 Shim     | Thickness is 1.5 mm (0.06 inch).     |
|
1 | 129-6159 Shim     | Thickness is 2.0 mm (0.08 inch).     |
|
12     | 1     | 173-1343 Pin     | Diameter is 79.950 ± 0.025 mm (3.1476 ± 0.0010 inch).     |
13     | 1     | 172-5857 Pin As     | Diameter is 69.950 ± 0.025 mm (2.7539 ± 0.0010 inch).     |
Caterpillar Information System:
315B Excavator Machine Systems Track Carrier Roller - Assemble
307B Excavator Offset Boom Control - If Equipped
330B Excavator Hydraulic System Operational Checks
M312 Excavator Machine System Pilot Control Valve (Auxiliary)
M318 and M320 Excavators Machine System Specifications Check Valve (Stick Drift Reduction)
5130B Excavator Hydraulic System Operational Checks
M312 Excavator Machine System Solenoid Valve
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Plate Locations and Film Locations
3412 Generator Set Engines Cylinder Block
330B Excavator Hydraulic System Relief Valve (Travel Motor) - Test and Adjust
M312 Excavator Machine System Relief Valve (Line)
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
M312 Excavator Machine System Lines (Boom Lowering Valve)
315B Excavator Machine Systems Track Roller - Remove
307B Excavator Shipping Specifications - One-Piece Boom
M312 Excavator Machine System Control Valve (Stick Lowering)
315B L Excavator Joystick Controls
3412 Generator Set Engines Cylinder Liner
315B Excavator Machine Systems Track Roller - Install
315B Excavator Machine Systems Track Roller - Disassemble
M312 Excavator Machine System Bucket Linkage - Retention
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Install