Boom - 1.99 m (6.529 ft)
Show/hide table
 | |
| Illustration 1 | g03317585 |
Show/hide table
| Specification for 118-5340 Stub Boom | |||
| Item | Qty | Part | Specification Description |
| - | All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the fore boom, the upper frame, the bushing, and the cylinder pin bores. | ||
| 1 | 6 | 8T-4956 Bolt | Torque to 100 ± 20 N·m (74 ± 15 lb ft). |
| 2 | As required, use the following shims in order to adjust the maximum lateral clearance of 1.6 mm (0.06 inch) and minimum lateral clearance of 0.5 mm (0.02 inch): |
||
| 1 | 129-6160 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 2 | 129-6158 Shim | Thickness is 1.5 mm (0.06 inch). |
|
| 1 | 129-6159 Shim | Thickness is 2.0 mm (0.08 inch). |
|
| 3 | 2 | 4I-0453 Bushing | Bore before assembly is 80.250 ± 0.020 mm (3.1594 ± 0.0008 inch). |
| Installation depth is 7.5 mm (0.30 inch). |
|||
| 4 | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2425 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 129-6160 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 5 | 4 | 096-0854 Lip Type Seal | Lubricate lightly with lubricant that is being sealed. |
| 6 | 1 | 173-1343 Pin | Diameter is 79.950 ± 0.025 mm (3.1476 ± 0.0010 inch). |
| 7 | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2425 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 129-6158 Shim | Thickness is 1.5 mm (0.06 inch). |
|
| 1 | 129-6159 Shim | Thickness is 2.0 mm (0.08 inch). |
|
| 8 | 1 | 8T-4780 Bolt | Torque to 325 ± 40 N·m (240 ± 30 lb ft). |
| 9 | 1 | 114-8642 Pin As | Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch). |
| 10 | 1 | 137-2919 Bushing | Bore before assembly is 80.250 to 80.335 mm (3.1594 to 3.1628 inch). |
| Installation depth is 7.0 ± 0.5 mm (0.28 ± 0.02 inch). |
|||
Caterpillar Information System:
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Install
315B Excavator Machine Systems Track Roller - Assemble
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Install
M312 Excavator Machine System Bucket Linkage - Retention
315B Excavator Machine Systems Track Roller - Disassemble
315B Excavator Machine Systems Track Roller - Install
3412 Generator Set Engines Cylinder Liner
315B L Excavator Joystick Controls
M312 Excavator Machine System Control Valve (Stick Lowering)
307B Excavator Shipping Specifications - One-Piece Boom
315B Excavator Machine Systems Track Roller - Remove
M312 Excavator Machine System Lines (Boom Lowering Valve)
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
315B Excavator Machine Systems Track - Separate
315B Excavator Machine Systems Track - Connect
M312 Excavator Hydraulic System Engine Performance - Test
M318 Excavator Hydraulic System Engine Performance - Test
315B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
M315 Excavator Machine System Boom - 3.7 m (12.14 ft)
330B Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
315B Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals
315B Excavator Machine Systems Main Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod