Boom - 3.7 m (12.14 ft)
Show/hide table
Illustration 1 | g03317491 |
Show/hide table
Specification for 118-5342 Fore Boom Gp     | |||
Item     | Qty     | Part     | Specification Description     |
All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the stick, stub boom, and the cylinder pin bores.     | |||
1     | 2     | 139-6831 Bushing     | Bore before assembly is 80.250 ± 0.020 mm (3.1594 ± 0.0008 inch).     |
2     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2425 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0115 Shim     | Thickness is 2.0 mm (0.08 inch).     |
|
3     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 093-0083 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
1 | 7Y-2498 Shim     | Thickness is 1.6 mm (0.06 inch).     |
|
4     | 3     | 8T-4780 Bolt     | Torque to 325 ± 40 N·m (240 ± 30 lb ft).     |
5     | 1     | 151-3152 Pin As     | Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).     |
6     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2717 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0097 Shim     | Thickness is 2.0 mm (0.08 inch).     |
|
7     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 093-0065 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
1 | 099-7091 Shim     | Thickness is 1.5 mm (0.06 inch).     |
|
8     | 1     | 172-5853 Pin As     | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch).     |
9     | 1     | 172-5857 Pin As     | Diameter is 69.950 ± 0.025 mm (2.7539 ± 0.0010 inch).     |
10     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 093-0086 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
1 | 7Y-2496 Shim     | Thickness is 1.6 mm (0.06 inch).     |
|
11     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2424 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0118 Shim     | Thickness is 2.0 mm (0.08 inch).     |
Caterpillar Information System:
315B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
M318 Excavator Hydraulic System Engine Performance - Test
M312 Excavator Hydraulic System Engine Performance - Test
315B Excavator Machine Systems Track - Connect
315B Excavator Machine Systems Track - Separate
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
M315 Excavator Machine System Boom - 1.99 m (6.529 ft)
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Install
315B Excavator Machine Systems Track Roller - Assemble
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Install
M312 Excavator Machine System Bucket Linkage - Retention
315B Excavator Machine Systems Track Roller - Disassemble
330B Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
315B Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals
315B Excavator Machine Systems Main Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod
315B Excavator Machine Systems Main Hydraulic Pump - Install
315B Excavator Machine Systems Main Hydraulic Pump - Disassemble
M318 and M320 Excavators Machine System Specifications Stabilizer
315B Excavator Machine Systems Front Idler - Disassemble
315B Excavator Machine Systems Pilot Valve (Travel) - Remove
315B Excavator Machine Systems Front Idler - Assemble
M312 Excavator Machine System Bucket