3176C and 3196 Engines for Caterpillar Built Machines Caterpillar


Connecting Rod Bearings - Inspect

Usage:

140H 126
连杆轴承必须与连杆轴承孔紧密地配合。 如果连杆与曲轴之间存在过大运动,则应检查孔径。 这可能由于松动配合导致的磨损的迹象。 请参阅可再利用零件指南, SEBF8009, "主轴承和连杆轴承"。

连杆轴承有比原尺寸轴承内径缩小 0.508 mm (0.0200 in)0.762 mm (0.0300 in) 的轴承可供选用。 这些轴承用于磨过的曲轴。

Caterpillar Information System:

3406E and 3456 Generator Set Engines Turbocharger - Install
3406E and 3456 Generator Set Engines Turbocharger - Remove
3500B Engines Engine Oil Pan
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0289 - FMI 13 Unfiltered Fuel Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0289 - FMI 03 Unfiltered Fuel Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0276 - FMI 04 Left Turbo Inlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0276 - FMI 03 Left Turbo Inlet Pressure open/short to +batt
3612 and 3616 Engines Engine Support
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0275 - FMI 13 Right Turbo Inlet Pressure calibration required
3612 and 3616 Engines Engine Support
Electronic Modular Control Panel II (EMCP II) For MUI Engines Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay (Overvoltage)
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Piston and Rings
3176C and 3196 Engines for Caterpillar Built Machines Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block - Inspect
3126B Marine Engine Turbocharger
3126B Marine Engine Aftercooler
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
3500B Engines and 3500 Engines with EUI Option Air Shutoff System
Accessing Flash Software for Machines{7610, 7620} Accessing Flash Software for Machines{7610, 7620}
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay (Overcurrent)
3406E and 3456 Generator Set Engines Flywheel Housing - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Engine Monitoring System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.