Customer Parameters Worksheet
更改任何可编程参数前请记录以下信息:
Show/hide table
发动机序列号     |     |
ECM 序列号     |     |
额定油量位置     |     |
低怠速转速     |     |
加速延迟时间     |     |
加速率     |     |
降温周期     |     |
降温转速     |     |
预润滑时间     |     |
盘车持续时间 (Crank Duration)     |     |
总盘车循环数     |     |
空气截止装置     |     |
燃油控制器     |     |
直接燃油控制模式     |     |
Show/hide table
喷油器码     | |
喷油器代码 (1)     |     |
喷油器代码 (2)     |     |
喷油器代码 (3)     |     |
喷油器代码 (4)     |     |
喷油器代码 (5)     |     |
喷油器代码 (6)     |     |
喷油器编码 (7)     |     |
喷油器编码 (8)     |     |
喷油器编码 (9)     |     |
喷油器编码 (10)     |     |
喷油器编码 (11)     |     |
喷油器编码 (12)     |     |
喷油器编码 (13)     |     |
喷油器编码 (14)     |     |
喷油器编码 (15)     |     |
喷油器编码 (16)     |     |
记录来自发动机监控系统的以下信息。
ECM 电压
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
发动机机油压力
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
关机断开点     |     |
关机延迟时间     |     |
冷却液温度高
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
减额断开点     |     |
减额延迟时间     |     |
关机断开点     |     |
关机延迟时间     |     |
冷却液温度过低
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
发动机超速
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
关机断开点     |     |
关机延迟时间     |     |
进气阻力
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
减额断开点     |     |
减额延迟时间     |     |
海拔高度
Show/hide table
减额断开点     |     |
排气温度高
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
减额断开点     |     |
延迟时间     |     |
发动机机油滤清器压差
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
燃气滤清器压差表
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
曲轴箱压力表
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
关机断开点     |     |
关机延迟时间     |     |
后冷却器温度
Show/hide table
报警断开点     |     |
报警延迟时间     |     |
减额断开点     |     |
减额延迟时间     |     |
关机断开点     |     |
关机延迟时间     |     |
Caterpillar Information System:
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Cylinder Block Cover Group
G3606 and G3608 Engines Prechamber Ignition Body - Install
G3606 and G3608 Engines Gas Admission Valve - Install
G3606 and G3608 Engines Exhaust Bypass - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Remove - 3003 Engines
3034 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
G3500 Engines Turbocharger - Remove
G3500 Engines Water Temperature Regulators - Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Instrument Panel
3406E Truck Engines Piston and Rings
3406E and 3456 Generator Set Engines Engine Oil Cooler - Remove
G3500 Engines Water Temperature Regulators - Remove
G3612 and G3616 Engines Air/Fuel Pressure Sensor Module - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Crankshaft
G3500 Engines Turbocharger - Install
G3500 Engines Turbocharger - Disassemble
3406E and 3456 Generator Set Engines Engine Oil Cooler - Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines Modes Of Operation
G3606 and G3608 Engines Crankcase Cover - Remove and Install
G3606 and G3608 Engines Accessory Module Frame (Front) - Remove
3034 Engine for Caterpillar Built Machines Engine Oil Pump - Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Normal Mode
3406E and 3456 Generator Set Engines Engine Oil Cooler - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing and Governor - Remove