Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
Usage:
Caterpillar Machines Powered By 3406 Engines
Several improvements have been made to the Remanufactured 0R-3008 Fuel Transfer Pump available for use on the 3406 engines in these machines. The improvements include:
-
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
- * The use of an air/electronic gauge to insure proper clearance between the tappet plunger and the tappet body. This helps prevent fuel dilution of the engine crankcase oil.
- * The use of a spring tester to help insure quality of the transfer pump center spring and proper pump discharge pressures.
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
Caterpillar Information System:
1997/03/17 VIMS Fuel Parameters Explained{7601}
1997/03/17 Setting User Access Rights For VIMS{7601}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/03/17 Procedure To Increase Swing Frame Service Life{6506}
1997/03/17 Swing Pump Braking Torque Response May Be Adjusted{5473,5467}
1997/03/17 Bottom Dump Cylinder Has Stronger Cylinder Cap{5457}
1997/03/17 The Addition Of Washers To The Boom Valve In The Main Hydraulic Control Improves Controllability{5051,5461}
1997/03/17 New Bolts And Washers Used To Retain Track Tensioner Cylinder Rod Seal{4197,4157}
1997/03/17 New Washers Used In Oil To Air Cooler Group To Improve Service Life{1374}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Correct Identification Of Flexible Coupling Group {3252}
1997/03/17 Extended Life Coolant Used{1353,1395}
1997/03/24 Front Shovel Bucket Ground Engaging Tool Update {0751,6800,6803,6823}
1997/03/24 New Adjusting Screw And Special Locknut For Main Control Valve Groups Use O-Rings To Improve Seal Between Adjusting Screw And Locknut {5051}
1997/03/24 Changes To Main Control Valve And Hydraulic System Improve Controllability {5051,5058,5454,5461,5462,5465,5466,5487}
1997/03/24 Control Valve Groups Use New Relief Valve Groups with Screened Seats {5069}
1997/03/24 New Piston Pumps With Improved Barrels, Better Pressure Balance Between The Port Plate And Barrel, And New "G" Port Valve Used For Implement And Swing Systems {5070,5084,5473}
1997/03/24 Improved Retention System For Excavator Tips And Couplers {6500,6515,6537,6800}
1997/03/24 Tightening Specifications Are Changed For Piston Locknut On Bucket, Boom And Stick Cylinders {5456,5457,5458}
1997/03/24 High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24 New VIMS Service Manual Is Available {7601}
1997/03/31 New Air Start Line Routing Hardware Used For Improved Service Life {1462}
1997/03/31 Changes To Main Control Valve And Hydraulic System Improve Controllability {5051,5058,5454,5461,5462,5465,5466,5487}