1997/03/17 Caterpillar


VIMS Fuel Parameters Explained{7601}

Usage:


5130 (5ZL, 7TJ),
5230 (7LL) Excavators;
784B (5RK) Tractor;
785B (6HK),
789B (7EK),
793B (1HL),
793C (4AR) Trucks;
992G (7HR),
994 (9YF) Wheel Loaders

Reference: Service Manual, SENR6059-03, "Vital Information Management System (VIMS)"

There is some confusion about the VIMS engine fuel rate, fuel flow, and fuel flow English parameters. This article shows the parameter abbreviation, the parameter full name, the parameter description and the units the parameter displays in.

Caterpillar Information System:

1997/03/17 Setting User Access Rights For VIMS{7601}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/03/17 Procedure To Increase Swing Frame Service Life{6506}
1997/03/17 Swing Pump Braking Torque Response May Be Adjusted{5473,5467}
1997/03/17 Bottom Dump Cylinder Has Stronger Cylinder Cap{5457}
1997/03/17 The Addition Of Washers To The Boom Valve In The Main Hydraulic Control Improves Controllability{5051,5461}
1997/03/17 New Bolts And Washers Used To Retain Track Tensioner Cylinder Rod Seal{4197,4157}
1997/03/17 New Washers Used In Oil To Air Cooler Group To Improve Service Life{1374}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Correct Identification Of Flexible Coupling Group {3252}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/17 Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17 Extended Life Coolant Used{1353,1395}
1997/03/24 Front Shovel Bucket Ground Engaging Tool Update {0751,6800,6803,6823}
1997/03/24 New Adjusting Screw And Special Locknut For Main Control Valve Groups Use O-Rings To Improve Seal Between Adjusting Screw And Locknut {5051}
1997/03/24 Changes To Main Control Valve And Hydraulic System Improve Controllability {5051,5058,5454,5461,5462,5465,5466,5487}
1997/03/24 Control Valve Groups Use New Relief Valve Groups with Screened Seats {5069}
1997/03/24 New Piston Pumps With Improved Barrels, Better Pressure Balance Between The Port Plate And Barrel, And New "G" Port Valve Used For Implement And Swing Systems {5070,5084,5473}
1997/03/24 Improved Retention System For Excavator Tips And Couplers {6500,6515,6537,6800}
1997/03/24 Tightening Specifications Are Changed For Piston Locknut On Bucket, Boom And Stick Cylinders {5456,5457,5458}
1997/03/24 High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24 New VIMS Service Manual Is Available {7601}
1997/03/31 New Air Start Line Routing Hardware Used For Improved Service Life {1462}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.