Heat Exchanger - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 4 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g01093438 - Disconnect hose (1) from the water pump.
Show/hide table
Illustration 2 g01093439 - Remove hose assemblies (2).
Show/hide table
Illustration 3 g01093441 - Disconnect harness assembly (4) from the coolant level sensor.
- Disconnect elbows (3) and (5) from the heat exchanger.
Show/hide table
Illustration 4 g01093444 - Disconnect elbows (6) and (7) from the heat exchanger.
Show/hide table
Illustration 5 g01093447 - Install Tooling (A) and a suitable lifting device to heat exchanger (8). The weight of the heat exchanger is approximately
66 kg (145 lb) . - Remove bolts (9) from each side of the mounting bracket for heat exchanger (8).
- Remove heat exchanger (8) from the engine.
Show/hide table
Illustration 6 g01093456 - Remove bolts (10) and tank (11) from the heat exchanger.
Caterpillar Information System:
G3408 and G3412 Engines Engine Oil Pan
G3606 and G3608 Engines Vibration Damper - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel System
3406C (PEEC III) Truck Engines Electrical System
3176C Industrial Engine Turbocharger - Install
3176C Industrial Engine Turbocharger - Remove
3612 and 3616 Engines Priority Valve - Assemble
3612 and 3616 Engines Priority Valve - Disassemble
3406C (PEEC III) Truck Engines Basic Block
3500B Engines for Caterpillar Built Power Modules Flywheel Housing Cover
3612 and 3616 Engines Priority Valve - Install
3054 and 3056 Industrial and Generator Set Engines General Information
797 Off-Highway Truck Steering System Steering Control Valve
G3408 and G3412 Engines Water Pump
Control Console For CPS361 Pumper, Cement Control Panel
3054 Engine for Caterpillar Built Machines Lifter Group - Remove and Install
SR4 HV and SR4B HV Generators Winding - Test
G3408 and G3412 Engines Vibration Damper
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3412E, C30 and C32 Marine Engines Heat Exchanger - Install
G3606 and G3608 Engines Vibration Damper - Install