Engine Oil Pan
Show/hide table
Illustration 1 | g00274390 |
(1) Apply 9S-3263 Thread Lock to the studs of the three plugs. Tighten the studs to the following torque. ... 80 ± 11 N·m (60 ± 8 lb ft)
Oil Breather Cap
Show/hide table
Illustration 2 | g00274448 |
(1) Breather assembly
(2) Torque for clamp ... 4.5 ± 0.6 N·m (40 ± 5 lb in)
Caterpillar Information System:
G3606 and G3608 Engines Vibration Damper - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel System
3406C (PEEC III) Truck Engines Electrical System
3176C Industrial Engine Turbocharger - Install
3176C Industrial Engine Turbocharger - Remove
3612 and 3616 Engines Priority Valve - Assemble
3612 and 3616 Engines Priority Valve - Disassemble
3406C (PEEC III) Truck Engines Basic Block
3500B Engines for Caterpillar Built Power Modules Flywheel Housing Cover
3612 and 3616 Engines Priority Valve - Install
3054 and 3056 Industrial and Generator Set Engines General Information
3406C (PEEC III) Truck Engines Cooling System
3412E, C30 and C32 Marine Engines Heat Exchanger - Remove
797 Off-Highway Truck Steering System Steering Control Valve
G3408 and G3412 Engines Water Pump
Control Console For CPS361 Pumper, Cement Control Panel
3054 Engine for Caterpillar Built Machines Lifter Group - Remove and Install
SR4 HV and SR4B HV Generators Winding - Test
G3408 and G3412 Engines Vibration Damper
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3412E, C30 and C32 Marine Engines Heat Exchanger - Install