Vibration Damper - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1U-9392 (1)     | 减振器导向销     | 2     |
1U-9393 (1) | 减振器导向销     | 2     | |
4C-9426 (1) | 减振器导向销     | 2     | |
B     | 8T-0914     | 飞轮导销     | 2     |
Show/hide table
( 1 ) | 所有导销均可用。 是否需要特定导销取决于您的应用。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下将减振器 (1) 固定至轴上的两个螺栓 (2) 。 在孔中安装工具 (A) 。
Show/hide table
图 1 | g00556435 |
- 卸下其余的螺栓 (2) 。 小心地将减振器 (1) 移至工具 (A) ,以便适当的起吊设备可以从减振器 (1) 的中间穿过。
- 将适当的起吊设备连接至减振器 (1) 上。 减振器 (1) 的重量约为 188 kg (414 lb)。 卸下减振器 (1) 。
- 卸下将适配器 (3) 固定到位的两个螺栓。 将工具 (B) 安装在孔内。
Show/hide table
图 2 | g00556436 |
- 卸下其余的螺栓。 小心地将适配器 (3) 移动到工具 (B) 上,以便适当的起吊设备可以从适配器 (3) 的中间穿过。
- 将适当的起吊设备连接至适配器 (3) 上。 适配器 (3) 的重量约为 30 kg (66 lb)。 拆下适配器 (3) 。
注: 有关重新装配减振器的信息,请参阅再使用和修补指南, SEBF8152, "为3600系列发动机重新装配减振器的步骤"。
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Fuel System
3406C (PEEC III) Truck Engines Electrical System
3176C Industrial Engine Turbocharger - Install
3176C Industrial Engine Turbocharger - Remove
3612 and 3616 Engines Priority Valve - Assemble
3612 and 3616 Engines Priority Valve - Disassemble
3406C (PEEC III) Truck Engines Basic Block
3500B Engines for Caterpillar Built Power Modules Flywheel Housing Cover
3612 and 3616 Engines Priority Valve - Install
3054 and 3056 Industrial and Generator Set Engines General Information
3406C (PEEC III) Truck Engines Cooling System
322B, 322B L, 325B and 325B L Excavators Travel Control - Straight Travel Pedal (If Equipped)
G3408 and G3412 Engines Engine Oil Pan
3412E, C30 and C32 Marine Engines Heat Exchanger - Remove
797 Off-Highway Truck Steering System Steering Control Valve
G3408 and G3412 Engines Water Pump
Control Console For CPS361 Pumper, Cement Control Panel
3054 Engine for Caterpillar Built Machines Lifter Group - Remove and Install
SR4 HV and SR4B HV Generators Winding - Test
G3408 and G3412 Engines Vibration Damper
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install