Lubrication Metering Pump - Remove and Install
拆卸步骤
- 断开软管组件 (2) 。
Show/hide table
图 1 | g00546884 |
G3608 发动机 |
- 拆下螺栓 (3) 。
- 卸下润滑计量泵 (1) 和 O 形圈。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 7M-7456     | 轴承安装固定胶     | 1     |
- 安装润滑计量泵 (1) 和 O 形圈。
Show/hide table
图 2 | g00546884 |
- 安装螺栓 (3) 。
- 在接头 (2) 的螺纹上涂敷工具 (A) 。 连接软管组件 (2) 。
- 以下是泵的调节步骤( G3606 发动机):
- 逆时针转动两个调整螺钉至完全拧开位置。
- 顺时针转动两个调整螺钉至最终位置。 螺钉应卡嗒 34 次。
- 以下是泵的调节步骤( G3608 发动机):
- 逆时针转动两个调整螺钉至完全拧开位置。
- 顺时针转动两个调整螺钉至最终位置。 螺钉应卡嗒 34 次
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
3054 Engine for Caterpillar Built Machines Flywheel - Install
Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000} Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000}
3054 Engine for Caterpillar Built Machines Flywheel - Remove
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3612 and 3616 Fast Vessel Engines Cooling System Coolant (ELC) - Change
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
G3606 and G3608 Engines Prelubrication Oil Pump - Assemble
3600 and C280 Diesel Engine Fluids Recommendations Crude Fuel Oil
3054 and 3056 Industrial and Generator Set Engines Water Pump - Assemble
3054 Engine for Caterpillar Built Machines Front Cover - Install
G3606 and G3608 Engines Engine Oil Pump - Remove
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3406E Truck Engine Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3176C Engine S·O·S Oil Analysis
3176C Engine Safety Signs and Labels
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Action Alarm and Alarm Silence Switch
3408E and 3412E Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install