Illustration 1 | g00493397 |
(1) "SCROLL" Switch (2) "CLEAR/MODE" Switch (3) "LH/RH SELECT" Switch (4) Caterpillar Monitoring System (5) "PUMP STOP" Switch (optional on 3412 engines) (6) Fault Reset Switch (unavailable on 3500 EUI engines. (7) "PUMP RUN" Switch (optional on 3412 engines) (8) Engine control switch (ECS) (9) Emergency stop push button (ESPB) (10) Gauge Cluster Module "II" (11) Gauge Cluster Module "I" (12) Caterpillar Monitoring System main display module |
Alarm
The Alarm is activated by the Main Display Module. The Alarm is turned ON whenever there is a parameter that is out of range. Also, the Alarm is turned ON whenever there is an active diagnostic fault.
Alarm Silence Switch
The Alarm Silence switch (6) is a push button switch that allows the operator to turn OFF the Action Alarm once the alarm has sounded. The Alarm Silence switch will silence the alarm for five minutes. After the five minute period, if the condition that initiated the alarm has not been corrected, the Action Alarm will sound again.