Coolant Temperature Sensor - Remove and Install
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 拆下导线系带 (2)。
- 将冷却液温度传感器接头 (3) 从发动机导线线束上断开。
- 将冷却液温度传感器 (1) 从发动机上拆下。
Show/hide table
图 1 | g00547145 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将冷却液温度传感器 (1) 安装在发动机上。
- 将冷却液温度传感器拧紧到
20 ± 3 N·m (15 ± 2 lb ft) 的扭矩。 - 将冷却液温度传感器接头 (3) 连接到发动机导线线束上。
- 使用导线系带 (2) 固定导线,使其远离冷却液温度传感器。
Show/hide table
图 2 | g00547145 |
Caterpillar Information System:
3406E Truck Engine Housing (Front)
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
G3606 and G3608 Engines Engine Oil Pump - Remove
3054 Engine for Caterpillar Built Machines Front Cover - Install
G3606 and G3608 Engines Lubrication Metering Pump - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
3054 Engine for Caterpillar Built Machines Flywheel - Install
Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000} Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000}
3054 Engine for Caterpillar Built Machines Flywheel - Remove
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3054 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3176C Engine S·O·S Oil Analysis
3176C Engine Safety Signs and Labels
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Action Alarm and Alarm Silence Switch
3408E and 3412E Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
3606 and 3608 Engines General Information (Fuel System)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Alert Indicator Description
Generator Set Control Panel for Switchgear Conversion Alarm Silence Switch - Troubleshoot