Housing (Front)
Show/hide table
图 1 | g00547095 |
典型示例 |
(1) 螺柱
- 拧紧缸体中的螺柱至以下扭矩。 ... 102 ± 10 N·m (75 ± 7 lb ft)
Show/hide table
图 2 | g00550498 |
视图 A-A、视图 B-B 和视图 C-C 的典型示例 |
(2) 制动螺柱
安装之前,先将 155-0695 螺纹锁固胶 涂抹在制动螺柱 (2) 的锯齿上。
(3) 密封垫圈
(4) 盘
(5) 螺栓
按照以下步骤以拧紧将盘固定到缸体上的螺栓。
- 使用手动工具拧紧螺栓。
将螺栓再次拧紧至以下扭矩。 ... 55 ± 5 N·m (40 ± 4 lb ft)
- 使用手动工具再次拧紧螺栓。
将螺栓再次拧紧至以下扭矩。 ... 55 ± 5 N·m (40 ± 4 lb ft)
(6) Belleville 垫圈
注: 涂抹 8T-9022 硅胶密封垫 以便填充前壳体、油底壳密封垫和缸体结合处的缝隙。
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
G3606 and G3608 Engines Engine Oil Pump - Remove
3054 Engine for Caterpillar Built Machines Front Cover - Install
G3606 and G3608 Engines Lubrication Metering Pump - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
3054 Engine for Caterpillar Built Machines Flywheel - Install
Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000} Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000}
3054 Engine for Caterpillar Built Machines Flywheel - Remove
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3612 and 3616 Fast Vessel Engines Cooling System Coolant (ELC) - Change
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3176C Engine S·O·S Oil Analysis
3176C Engine Safety Signs and Labels
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Action Alarm and Alarm Silence Switch
3408E and 3412E Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
3606 and 3608 Engines General Information (Fuel System)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Alert Indicator Description