PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 153-2521 LAMP GROUP ON CERTAIN M325C MATERIAL HANDLERS Caterpillar


PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 153-2521 LAMP GROUP ON CERTAIN M325C MATERIAL HANDLERS

Usage:

SEBE9481-01

February 1, 2006
(Revised June 2006)
U-44
A-35
O-38


 
Safety

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 153-2521 LAMP GROUP ON CERTAIN M325C MATERIAL HANDLERS

1434
PI10442
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI10442" as the Part number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI10442" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE: This Revised Service Letter replaces the February 1, 2006 Service Letter. Changes have been made to the Affected Product.

PROBLEM

The 192-9819 Plate Assembly on the left side of the boom can interfere with the glass on the right side of the cab on certain M325C Material Handlers. This may cause the glass to break on the right side of the cab.
 

AFFECTED PRODUCT

Model Identification Number
M325C MH XJA240-279, 281, 283, 284, 287
PAN294-330, 332

PARTS NEEDED

Qty

Part Number Description
2 9G3695 PLUG-SEALING
2 1863736 SOCKET-CONNE
1 1028802 RECEPTACLE K
1 1552270 PLUG KIT-CON

ACTION REQUIRED

  1. Remove the left 192-9819 Plate Assembly from the boom.
  2. Remove the left 153-2521 Lamp Group from the boom.
  3. Protect the wires using a blank plug.

OWNER NOTIFICATION

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Caterpillar
Dealer Suggested
Customer Suggested
Parts
Labor Hrs.
Parts
Labor Hrs.
Parts
Labor Hrs.
100%
1.0
0
0
0
0
NOTE: This is a 1.0-hour job.

NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report

PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Attach. (1-Owner Notification)

COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 153-2521 LAMP GROUP

MODELS INVOLVED - M325C MATERIAL HANDLERS

Dear Caterpillar Product Owner:

The left lamp group on the boom needs to be removed from the boom on the products listed below. The lamp group can interfere with the glass on the right side of the cab. This can cause the glass to break possibly causing personal injury. You will not be charged for the service performed.

Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated February 1, 2006 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction.
 
 

Caterpillar Inc.

Identification #(s)

Attached to February 1, 2006 Service Letter

Caterpillar Information System:

PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE LINE RELIEF VALVE PRESSURE SETTINGS FOR THE STICK CYLINDER AND BUCKET CYLINDER ON CERTAIN 320C, 320C L, 322C, AND 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH CONFIGURATION PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE LINE RELIEF VALVE PRESSURE SETTINGS FOR THE STICK CYLINDER AND BUCKET CYLINDER ON CERTAIN 320C, 320C L, 322C, AND 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH CONFIGURATION
PRODUCT SUPPORT PROGRAM FOR REPAIRING BOOM CRACKS ON CERTAIN 304 CR AND 305 CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPAIRING BOOM CRACKS ON CERTAIN 304 CR AND 305 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK THAT MAY CRACK ON CERTAIN 320C, 320C L, 322C, AND 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH CONFIGURATION PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK THAT MAY CRACK ON CERTAIN 320C, 320C L, 322C, AND 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH CONFIGURATION
PRODUCT SUPPORT PROGRAM FOR PERFORMING A DELIVERY INSPECTION ON CERTAIN COMPACT WHEEL LOADERS, SMALL WHEEL LOADERS, MINI-HYDRAULIC EXCAVATORS, BACKHOE LOADERS, AND TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR PERFORMING A DELIVERY INSPECTION ON CERTAIN COMPACT WHEEL LOADERS, SMALL WHEEL LOADERS, MINI-HYDRAULIC EXCAVATORS, BACKHOE LOADERS, AND TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE BOOM ON CERTAIN 345B SERIES II, 345B L SERIES II, 345C, AND 345C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE BOOM ON CERTAIN 345B SERIES II, 345B L SERIES II, 345C, AND 345C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO INSTALL DECALS AND A NEW OPERATION AND MAINTENANCE MANUAL FOR CERTAIN CATERPILLAR PIN GRABBER COUPLERS PRODUCT IMPROVEMENT PROGRAM TO INSTALL DECALS AND A NEW OPERATION AND MAINTENANCE MANUAL FOR CERTAIN CATERPILLAR PIN GRABBER COUPLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE THREAD DEPTH OF THE M16 MOUNTING HOLES IN THE MAIN CONTROL VALVE ON CERTAIN 320C, 320C L, 320C LU, AND 330C L HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE THREAD DEPTH OF THE M16 MOUNTING HOLES IN THE MAIN CONTROL VALVE ON CERTAIN 320C, 320C L, 320C LU, AND 330C L HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAM PLATE FOR THE TRAVEL MOTOR ON CERTAIN 325C AND 330C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAM PLATE FOR THE TRAVEL MOTOR ON CERTAIN 325C AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTION AND REPAIR OF CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTION AND REPAIR OF CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HANDRAILS ON CERTAIN 345B SERIES II EXCAVATORS THAT ARE EQUIPPED WITH A WIDE HEAVY DUTY UNDERCARRIAGE IN ORDER TO IMPROVE ACCESS TO THE CAB AND ACCESS PLATFORM PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HANDRAILS ON CERTAIN 345B SERIES II EXCAVATORS THAT ARE EQUIPPED WITH A WIDE HEAVY DUTY UNDERCARRIAGE IN ORDER TO IMPROVE ACCESS TO THE CAB AND ACCESS PLATFORM
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MOUNTING BOLTS FOR THE COUNTERWEIGHT ON CERTAIN 345C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MOUNTING BOLTS FOR THE COUNTERWEIGHT ON CERTAIN 345C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 230-0185 HOSE ASSEMBLY ON CERTAIN 345C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 230-0185 HOSE ASSEMBLY ON CERTAIN 345C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE GROUPS AND JOYSTICK GROUPS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE GROUPS AND JOYSTICK GROUPS FROM DEALERS PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL BRAKE HOSE COUPLINGS ON CERTAIN M300C WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL BRAKE HOSE COUPLINGS ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A PLATE TO THE FRAME ON CERTAIN PC205 AND PC206 COLD PLANER ATTACHMENTS FOR SKID STEER LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A PLATE TO THE FRAME ON CERTAIN PC205 AND PC206 COLD PLANER ATTACHMENTS FOR SKID STEER LOADERS
PRODUCT SUPPORT PROGRAM FOR PERFORMING A PRE-DELIVERY INSPECTION ON CERTAIN M313C, M315C, M316C, M318C, M318C MH, M322C, AND M322C MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR PERFORMING A PRE-DELIVERY INSPECTION ON CERTAIN M313C, M315C, M316C, M318C, M318C MH, M322C, AND M322C MH WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 189-1732 PLATFORM ON CERTAIN 375 L AND 5080 HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 189-1732 PLATFORM ON CERTAIN 375 L AND 5080 HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW BRACKET FOR THE ALTERNATE EXIT ON CERTAIN FORESTRY EXCAVATORS AND TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW BRACKET FOR THE ALTERNATE EXIT ON CERTAIN FORESTRY EXCAVATORS AND TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 131-5675 COVER ON THE CONTROL VALVE ON CERTAIN 345C, 345C L, AND 345C LC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 131-5675 COVER ON THE CONTROL VALVE ON CERTAIN 345C, 345C L, AND 345C LC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 143-0741 AND 143-0744 HOSE ASSEMBLIES FOR THE AIR CONDITIONER ON CERTAIN 345B L SERIES II EXCAVATORS AND 345B L SERIES II MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 143-0741 AND 143-0744 HOSE ASSEMBLIES FOR THE AIR CONDITIONER ON CERTAIN 345B L SERIES II EXCAVATORS AND 345B L SERIES II MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOZER BLADE ON CERTAIN 304 AND 305 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOZER BLADE ON CERTAIN 304 AND 305 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PERFORMING EARLY HOUR INSPECTIONS ON CERTAIN 345C L, 365C L, 365C L MH, 385C, 385C L, AND 385C L MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR PERFORMING EARLY HOUR INSPECTIONS ON CERTAIN 345C L, 365C L, 365C L MH, 385C, 385C L, AND 385C L MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER THAT MAY FAIL ON CERTAIN 303 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER THAT MAY FAIL ON CERTAIN 303 MINI HYDRAULIC EXCAVATORS
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.