Front Cover - Remove
开始:
- 拆下交流发电机。 请参阅拆解和组装, "交流发电机 - 拆卸和安装"。
- 拆下皮带张紧装置。 请参阅拆解和组装皮带, "张紧装置 - 拆卸和安装"。
- 拆卸曲轴前油封。 请参阅拆解和组装, "曲轴前密封 - 拆卸"。
- 拆下燃油输油泵。 请参阅拆解和组装, "燃油输油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 卸下螺栓 (1) 及配套螺母和密封件垫圈。
- 拆下螺栓 (2) 和垫圈。
- 拆下螺栓 (3)。
- 拆下前盖 (4)。
- 拆下壳体盖 (5) 。
Show/hide table
| |
| 图 1 | g01021415 |
|
典型实例 | |
Caterpillar Information System:
3406E On-Highway Engine Crankshaft - Remove
3406E On-Highway Engine Engine Oil Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Install
G3500B Engines Reference Material
3608 Engine Engine Design
3600 Heavy Fuel Engines Exhaust Piping - Inspect
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Remove
3406E On-Highway Engine Engine Oil Filter Base - Disassemble
G3500B Engines Refill Capacities and Recommendations
3176C and 3196 Industrial Engines Inlet Manifold - Install
3406E On-Highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
3176C and 3196 Industrial Engines Inlet Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines Front Cover - Install
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Remove
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Install
3608 Engine Governor Drive
3406C (PEEC III) Truck Engine Electric Starting Motor
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Remove
G3300 Engines Engine Oil Level - Check
3606 and 3608 Engines Camshaft
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Install
G3300 Engines Engine Oil Sample - Obtain
G3300 Engines Engine Oil and Filter - Change
3406E On-Highway Engine Crankshaft - Install