Crankshaft - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1H-3110     | 轴承拉拔器     | 1     |
8B-7560 | 踏脚板     | 1     | |
9U-6600 | 手动液压泵     | 1     | |
1H-3108 | 推拉支腿     | 2     | |
1H-3107 | 轴承拉拔器     | 1     | |
3H-0468 | 拉拔器板     | 5     | |
3H-0465 | 压拉器板     | 2     | |
1P-0820 | 液压拉拔器     | 1     | |
5B-0637 | 螺母     | 1     | |
8S-6586 | 顶出螺钉     | 1     | |
B     | 5P-0944     | 定位销拉拔器总成     | 1     |
5P-0939 | 定位销拔出工具     | 1     |
开始:
- 拆下前壳体。 请参阅拆解和组装, "壳体(前) - 拆卸"。
- 拆下飞轮壳体。 请参阅拆解和组装, "飞轮壳体 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 检查主轴承盖的识别标记。 如有必要,在主轴承盖上做识别标记。
- 从主轴承盖上拆下螺栓 (2) 。 拆下主轴承盖 (1) 。
Show/hide table
图 1 | g01029693 |
- 拆下连杆盖。
Show/hide table
图 2 | g01029696 |
- 将合适的起吊设备连接到曲轴 (3) 。 曲轴 (3) 的重量约为 159 kg (350 lb)。 将曲轴 (3) 从缸体上拆下。
- 使用工具 (A) 拆下曲轴齿轮 (4) 。
- 使用工具 (B) 拆下定位销和销钉。
Caterpillar Information System:
3406E On-Highway Engine Engine Oil Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Install
G3500B Engines Reference Material
3608 Engine Engine Design
3600 Heavy Fuel Engines Exhaust Piping - Inspect
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Remove
3406E On-Highway Engine Engine Oil Filter Base - Disassemble
G3500B Engines Refill Capacities and Recommendations
3176C and 3196 Industrial Engines Inlet Manifold - Install
3406E On-Highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
3176C and 3196 Industrial Engines Inlet Manifold - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Front Cover - Remove
3176C and 3196 Engines For Caterpillar Built Machines Front Cover - Install
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Remove
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Install
3608 Engine Governor Drive
3406C (PEEC III) Truck Engine Electric Starting Motor
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Remove
G3300 Engines Engine Oil Level - Check
3606 and 3608 Engines Camshaft
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Install
G3300 Engines Engine Oil Sample - Obtain
G3300 Engines Engine Oil and Filter - Change