Oil Filter (Brake) - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Refer to Operation and Maintenance Manual, "System Pressure Release".
Show/hide table
| |
| Illustration 1 | g06270190 |
Show/hide table
| |
| Illustration 2 | g06270226 |
Install the oil filter in the reverse order of removal.
Caterpillar Information System:
BD118 and BD121 Side Discharge Bucket Declaration of Conformity
BD118 and BD121 Side Discharge Bucket Plate Locations and Film Locations
BD118 and BD121 Side Discharge Bucket Safety Messages
Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119} Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119}
986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
986K Wheel Loader Machine Systems Oil Filter (Implement Pump Case Drain) - Remove and Install
24 Motor Grader Power Train Transfer Gears - Disassemble - Output
730,735 and 730 EJECTOR Articulated Truck Systems Pressure Sensor - HVAC
986K Wheel Loader Machine Systems Tilt Position Sensor and Mounting (Worktool Positioner Control) - Remove and Install
New Software is Now Used on Certain M Series Motor Graders {7620} New Software is Now Used on Certain M Series Motor Graders {7620}
986K Wheel Loader Machine Systems Oil Filter (Implement Pilot) (Front Pump Drive) - Remove and Install
The Crankcase Breather for the Engine is Relocated {1107} The Crankcase Breather for the Engine is Relocated {1107}
Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077} Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077}
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057} Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057}
Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051} Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051}
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Radio
Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408} Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408}
A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408} A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408}
986K Large Wheel Loader Systems Parking Brake
986K Large Wheel Loader Systems Steering Control Valve
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468} M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
986K Large Wheel Loader Systems Gear Pump (Secondary Steering)
986K Large Wheel Loader Systems Secondary Steering System