A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408} Caterpillar

A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408}

Usage:

PM620 JB9

Cold Planer: PM620 (S/N: JB91-165; LH91-135); PM622 (S/N: JFC1-164; JCF1-101)

Description Of Change: A new harness has been released to allow 3D leveling system installation. A procedure has been released to rework existing machines on the field. Refer to Special Instruction, M0090047, "Procedure To Install 3D Grade Control Harness On Certain Cold Planers"

.

Adaptable To: This change is adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers

Show/hide table

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.

Caterpillar Information System:

Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408} Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408}

12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Radio

Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051} Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051}

Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057} Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057}

C7.1 Industrial Engine Engine Air Cleaner Element - Replace

Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077} Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077}

785G Off-Highway Truck Machines Systems Oil Filter (Brake) - Remove and Install

BD118 and BD121 Side Discharge Bucket Declaration of Conformity

BD118 and BD121 Side Discharge Bucket Plate Locations and Film Locations

BD118 and BD121 Side Discharge Bucket Safety Messages

Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119} Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119}

986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install

986K Large Wheel Loader Systems Parking Brake

986K Large Wheel Loader Systems Steering Control Valve

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468} M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

986K Large Wheel Loader Systems Gear Pump (Secondary Steering)

986K Large Wheel Loader Systems Secondary Steering System

Assigned View May Not Get Deleted With Ownership Change in Cat® Product Link (PL) Web {7606} Assigned View May Not Get Deleted With Ownership Change in Cat® Product Link (PL) Web {7606}

986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install

® for Dozing, Gen 3.5 Remote Control Operator Console for D8T Track Type Tractor ECM Location Code - Test

986K Large Wheel Loader Systems Ride Control System

986K Large Wheel Loader Connector Locations

785G Off-Highway Truck Machines Systems Brake Valve - Remove and Install - Accumulator Charging

986K Large Wheel Loader Torque Converter