Declaration of Conformity
Show/hide table
| An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to 2006/42/EC applies only to those machines originally CE marked by the manufacturer listed and which have not since been modified. | ||||||
| ORIGINAL EC or EU DECLARATION OF CONFORMITY | ||||||
| Manufacturer:
Caterpillar Inc. Peoria, IL. USA |
||||||
| Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
| Standards & Regulations Manager, Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France |
||||||
| I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
| Description: | Generic Denomination: | Earth-moving Equipment | ||||
| Function: | Side Discharge Bucket | |||||
| Model/Type: | BD118 and BD121 | |||||
| Serial Number: | ||||||
| Commercial Name: | Caterpillar Inc. | |||||
| Fulfills all the relevant provisions of the following Directives | ||||||
| Directives | Notified Body | Document No. | ||||
| 2006/42/EC | N/A | |||||
| 2004/108/EC | N/A | |||||
| 2014/30/EU | N/A | |||||
| Done at: | Signature | |||||
| Date: | Name/Position | |||||
| Note: The above information was correct as of February 2018, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. | ||||||
Caterpillar Information System:
BD118 and BD121 Side Discharge Bucket Plate Locations and Film Locations
BD118 and BD121 Side Discharge Bucket Safety Messages
Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119} Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119}
986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
986K Wheel Loader Machine Systems Oil Filter (Implement Pump Case Drain) - Remove and Install
24 Motor Grader Power Train Transfer Gears - Disassemble - Output
730,735 and 730 EJECTOR Articulated Truck Systems Pressure Sensor - HVAC
986K Wheel Loader Machine Systems Tilt Position Sensor and Mounting (Worktool Positioner Control) - Remove and Install
New Software is Now Used on Certain M Series Motor Graders {7620} New Software is Now Used on Certain M Series Motor Graders {7620}
986K Wheel Loader Machine Systems Oil Filter (Implement Pilot) (Front Pump Drive) - Remove and Install
The Crankcase Breather for the Engine is Relocated {1107} The Crankcase Breather for the Engine is Relocated {1107}
794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000} 794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000}
785G Off-Highway Truck Machines Systems Oil Filter (Brake) - Remove and Install
Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077} Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077}
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057} Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057}
Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051} Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051}
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Radio
Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408} Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408}
A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408} A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408}
986K Large Wheel Loader Systems Parking Brake
986K Large Wheel Loader Systems Steering Control Valve
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468} M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
986K Large Wheel Loader Systems Gear Pump (Secondary Steering)