Tilt Position Sensor and Mounting (Worktool Positioner Control) - Remove and Install
Start By:
- Connect the steering frame lock.
- Disconnect harness assembly (2). Remove bolt (1) and disconnect clamp assembly (3).
Show/hide table
Illustration 2 g06268783 - Remove bolt (4) and plate (5).
Show/hide table
Illustration 3 g06268788 - Remove bolts (6) and guard assembly (7).
Show/hide table
Illustration 4 g06268791 - Remove bolts (8) and lift position control assembly (9).
Show/hide table
Illustration 5 g06268793 - Remove nuts (11), bolts (12), and position sensor (10).
Show/hide table
| |
| Illustration 1 | g06268770 |
- Install the lift position control in the reverse order of removal.
Caterpillar Information System:
New Software is Now Used on Certain M Series Motor Graders {7620} New Software is Now Used on Certain M Series Motor Graders {7620}
986K Wheel Loader Machine Systems Oil Filter (Implement Pilot) (Front Pump Drive) - Remove and Install
The Crankcase Breather for the Engine is Relocated {1107} The Crankcase Breather for the Engine is Relocated {1107}
794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000} 794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000}
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Cab Mounted Components - Remove and Install
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Roof Mounted Components - Remove and Install
AP600F Asphalt Paver Feeder Control Sensor
Tube Assembly For the Boom Load Control Valve May Crack on Certain Material Handlers and Wheeled Excavators {5057, 5067} Tube Assembly For the Boom Load Control Valve May Crack on Certain Material Handlers and Wheeled Excavators {5057, 5067}
Certain Cat® Product Link Assets' Product ID May Not Be Configured {7606} Certain Cat® Product Link Assets' Product ID May Not Be Configured {7606}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Proximity Switch (Door)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Accumulator Charging Valve (Brake) - Test
Main Hydraulic Pump Mounting Bolts May Loosen on Certain 559D, 579D, 2384D, and 2484D Knuckleboom Loaders {5070} Main Hydraulic Pump Mounting Bolts May Loosen on Certain 559D, 579D, 2384D, and 2484D Knuckleboom Loaders {5070}
730,735 and 730 EJECTOR Articulated Truck Systems Pressure Sensor - HVAC
24 Motor Grader Power Train Transfer Gears - Disassemble - Output
986K Wheel Loader Machine Systems Oil Filter (Implement Pump Case Drain) - Remove and Install
986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119} Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119}
BD118 and BD121 Side Discharge Bucket Safety Messages
BD118 and BD121 Side Discharge Bucket Plate Locations and Film Locations
BD118 and BD121 Side Discharge Bucket Declaration of Conformity
785G Off-Highway Truck Machines Systems Oil Filter (Brake) - Remove and Install
Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077} Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077}
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057} Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057}