Illustration 1 | g06270071 |
Typical example |
There are several specific safety messages on this work tool. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiarized with all safety messages.
Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.
Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a new safety message on the replacement part. Any Cat dealer can provide new safety messages.
This safety message (1) is located on or near the rear of the work tool.
Illustration 2 | g06270064 |
Do not place hand on or near work tool during operation. Work tool has rotating cutters. Entanglement could cause serious injury or death. Read the Operation and Maintenance Manual. |
This safety message (2) is located on or near the rear of the work tool.
Illustration 3 | g06270066 |
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility. |
This safety message (3) is located on or near the rear of the work tool.
Illustration 4 | g06270062 |
Entanglement Hazard Rotating parts can cause personal injury. Stop engine before servicing. |