730,735 and 730 EJECTOR Articulated Truck Systems Caterpillar


Pressure Sensor - HVAC

Usage:

730 3F3


Illustration 1g06269623
Typical example

Table 1
Item  Qty  Part  Specification Description 
367-9098 Pressure Sensor Gp  Torque to 10 ± 2 N·m (89 ± 18 lb in)
Operating voltage 8.0 ± 0.5 VDC.
Output frequency is 500 ± 150 Hz.
Duty cycle is between 5% and 90%.

Caterpillar Information System:

986K Wheel Loader Machine Systems Tilt Position Sensor and Mounting (Worktool Positioner Control) - Remove and Install
New Software is Now Used on Certain M Series Motor Graders {7620} New Software is Now Used on Certain M Series Motor Graders {7620}
986K Wheel Loader Machine Systems Oil Filter (Implement Pilot) (Front Pump Drive) - Remove and Install
The Crankcase Breather for the Engine is Relocated {1107} The Crankcase Breather for the Engine is Relocated {1107}
794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000} 794AC C175 Engine Generator Lifting Group {0599, 0629, 0632, 0701, 1000}
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Cab Mounted Components - Remove and Install
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Roof Mounted Components - Remove and Install
AP600F Asphalt Paver Feeder Control Sensor
Tube Assembly For the Boom Load Control Valve May Crack on Certain Material Handlers and Wheeled Excavators {5057, 5067} Tube Assembly For the Boom Load Control Valve May Crack on Certain Material Handlers and Wheeled Excavators {5057, 5067}
Certain Cat® Product Link Assets' Product ID May Not Be Configured {7606} Certain Cat® Product Link Assets' Product ID May Not Be Configured {7606}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Proximity Switch (Door)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Accumulator Charging Valve (Brake) - Test
24 Motor Grader Power Train Transfer Gears - Disassemble - Output
986K Wheel Loader Machine Systems Oil Filter (Implement Pump Case Drain) - Remove and Install
986K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119} Improved Lift Arms Now Used on R3000H Load Haul Dump Machines {6119}
BD118 and BD121 Side Discharge Bucket Safety Messages
BD118 and BD121 Side Discharge Bucket Plate Locations and Film Locations
BD118 and BD121 Side Discharge Bucket Declaration of Conformity
785G Off-Highway Truck Machines Systems Oil Filter (Brake) - Remove and Install
Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077} Parts Required for Attaching Improved Pilot Oil Accumulator Group to Pilot Lines Group on Certain Compact Wheel Loaders and Integrated Tool carrier {5077}
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057} Hystat Performance Issues in Extreme Cold on Certain 914G/G2, IT14G2 Compact Wheel Loaders, and IT14 Integrated Toolcarriers {4350, 5057}
Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051} Installation Procedure for Upgraded Extender Deflectors and Main Frame End Caps on Certain SE60V. {6631, 6641, 7051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.