Sliding Frame and Bearing - Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g06174364 |
Show/hide table
| |
| Illustration 2 | g06174365 |
Show/hide table
| |
| Illustration 3 | g06174366 |
Show/hide table
| |
| Illustration 4 | g06174367 |
Show/hide table
| |
| Illustration 5 | g06174368 |
Show/hide table
| |
| Illustration 6 | g06174369 |
Show/hide table
| |
| Illustration 7 | g06174370 |
Note: Do not tighten bolts at this time.
Show/hide table
| |
| Illustration 8 | g06174371 |
Show/hide table
| |
| Illustration 9 | g06174372 |
Show/hide table
| |
| Illustration 10 | g06174374 |
End By:
- Install the swing cylinder.
- Install the swing frame.
Caterpillar Information System:
426F2 Back Hoe Loader Machine System Sliding Frame and Bearing - Remove
740 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
559D, 579D Knuckleboom Loader Fuel Tank Cap and Strainer - Clean
426F2 Back Hoe Loader Machine System Cab - Remove
773E Off-Highway Truck Engine Supplement Hood (Rear) - Remove and Install
426F2 Back Hoe Loader Machine System Stabilizer Cylinder - Remove and Install
A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160} A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160}
New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095} New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095}
Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057} Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057}
Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051} Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051}
Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051} Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051}
773E Off-Highway Truck Sound Information and Vibration Information
785G Off-Highway Truck Machines Systems Electronic Control Module (Power Train) - Remove and Install
New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168} New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
CD10 Vibratory Asphalt Compactor Machine Systems Machine Preparation for Troubleshooting
CD10 Vibratory Asphalt Compactor Machine Systems Visual Inspection
CD10 Asphalt Compactor Propel Systems System Pressure - Release
559D, 579D Knuckleboom Loader Hydraulic System Oil Filter (Case Drain) - Replace
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Exhaust Has Excessive Black Smoke
3516E Engine for 994K Wheel Loaders Turbocharger Turbine Temperature Is High
559D, 579D Knuckleboom Loader Hydraulic System Oil Level - Check
2384D 2484D Knuckle Boom Loader Hydraulic System Oil Sample - Obtain
559D, 579D Knuckleboom Loader Swing Drive Oil - Change