Hood (Rear) - Remove and Install
Start By:
- Install the body retaining pin.
- Raise rear hood (1).
- Attach a suitable lifting device to rear hood (1). The weight of rear hood (1) is approximately
26 kg (58 lb) .Show/hide tableIllustration 2 g06173853 - Remove nut (2) and the washer. Reposition gas spring assembly (3).
Show/hide table
Illustration 3 g06173854 - Remove bolts (4), nuts (5), and washers (6).
- Remove rear hood (1).
Show/hide table
Illustration 1 | g06173848 |
- Install rear hood (1) in the reverse order of removal.
- Tighten nuts (4) to a torque of
25 ± 6 N·m (221 ± 53 lb in) .
- Tighten nuts (4) to a torque of
Caterpillar Information System:
426F2 Back Hoe Loader Machine System Stabilizer Cylinder - Remove and Install
A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160} A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160}
New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095} New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095}
Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057} Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057}
Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051} Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051}
Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051} Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051}
773E Off-Highway Truck Sound Information and Vibration Information
426F2 Back Hoe Loader Machine System Lift Cylinder - Assemble - Parallel Lift
426F2 Back Hoe Loader Machine System Lift Cylinder - Disassemble - Parallel Lift
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Procedure for Installation and Configuration of Driver Safety System - Highway on Certain Cat® Products {7620} Procedure for Installation and Configuration of Driver Safety System - Highway on Certain Cat® Products {7620}
559D, 579D Knuckleboom Loader Fuel System Primary Filter (Water Separator) Element - Replace
426F2 Back Hoe Loader Machine System Cab - Remove
559D, 579D Knuckleboom Loader Fuel Tank Cap and Strainer - Clean
740 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
426F2 Back Hoe Loader Machine System Sliding Frame and Bearing - Remove
426F2 Back Hoe Loader Machine System Sliding Frame and Bearing - Install
785G Off-Highway Truck Machines Systems Electronic Control Module (Power Train) - Remove and Install
New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168} New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
CD10 Vibratory Asphalt Compactor Machine Systems Machine Preparation for Troubleshooting
CD10 Vibratory Asphalt Compactor Machine Systems Visual Inspection
CD10 Asphalt Compactor Propel Systems System Pressure - Release
559D, 579D Knuckleboom Loader Hydraulic System Oil Filter (Case Drain) - Replace