426F2 Back Hoe Loader Machine System Caterpillar


Cab - Remove

Usage:

426 F2 DJ4
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
477-3139  Eye bolt assembly 

Start By:

  1. Release the pressure in the hydraulic system.

  2. Remove steering wheel.

  3. Remove seat assembly.

  4. Drain the coolant.

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, ""All Products Air Conditioning and Heating R-134a for All Caterpillar Machines" for the correct procedure. Refer to Special Publication, NENG2500, ""Air Conditioning Tools"" for the correct tools."



Illustration 1g06162881


Illustration 2g06162922


Illustration 3g06173932


Illustration 4g06178314


Illustration 5g06178350


Illustration 6g06223367


Illustration 7g06213064


Illustration 8g06213075


Illustration 9g06223457


Illustration 10g06223369


Illustration 11g06223374


Illustration 12g06213098


Illustration 13g06213105


Illustration 14g06213114


Illustration 15g06213132


Illustration 16g06213183


Illustration 17g06213185
If equipped with heater.


Illustration 18g06213197
If equipped with air conditioner or heater.


Illustration 19g06213203


Illustration 20g06213211
If equipped with air conditioner.


Illustration 21g06213214


Illustration 22g06213223


Illustration 23g06213388


Illustration 24g06213394


Illustration 25g06213441
Check for any ground straps and hose assemblies that may be attached to the cab assembly.


Illustration 26g06223388


Illustration 27g06223433


Illustration 28g06223437


Illustration 29g06223442
Remove plugs (not shown) to access the nuts.


Illustration 30g06223439

Caterpillar Information System:

773E Off-Highway Truck Engine Supplement Hood (Rear) - Remove and Install
426F2 Back Hoe Loader Machine System Stabilizer Cylinder - Remove and Install
A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160} A New Assembly Tool for Number 1 Clutch Supply Tube for 785 - 793 Off-Highway Truck Transmissions is Available {0599, 0700, 0717, 3160}
New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095} New Main Relief Valve for Transmission Arrangement is Now Used On Certain 797F Off-Highway Trucks {3133, 3167, 3182, 4095}
Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057} Improved Hydraulic Hose Assemblies are Now Used on Certain 797 and 797B Off-Highway Trucks {3016, 3154, 4304, 5057}
Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051} Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051}
Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051} Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051}
773E Off-Highway Truck Sound Information and Vibration Information
426F2 Back Hoe Loader Machine System Lift Cylinder - Assemble - Parallel Lift
426F2 Back Hoe Loader Machine System Lift Cylinder - Disassemble - Parallel Lift
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Procedure for Installation and Configuration of Driver Safety System - Highway on Certain Cat® Products {7620} Procedure for Installation and Configuration of Driver Safety System - Highway on Certain Cat® Products {7620}
559D, 579D Knuckleboom Loader Fuel Tank Cap and Strainer - Clean
740 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
426F2 Back Hoe Loader Machine System Sliding Frame and Bearing - Remove
426F2 Back Hoe Loader Machine System Sliding Frame and Bearing - Install
785G Off-Highway Truck Machines Systems Electronic Control Module (Power Train) - Remove and Install
New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168} New Alternator Group and Support Bracket are Now Used on Certain 770G and 772G Off-Highway Trucks {1207, 1357, 1358, 1397, 1405, 1802, 7168}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
CD10 Vibratory Asphalt Compactor Machine Systems Machine Preparation for Troubleshooting
CD10 Vibratory Asphalt Compactor Machine Systems Visual Inspection
CD10 Asphalt Compactor Propel Systems System Pressure - Release
559D, 579D Knuckleboom Loader Hydraulic System Oil Filter (Case Drain) - Replace
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Exhaust Has Excessive Black Smoke
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.