Air Inlet and Exhaust Module - Remove - Eight Turbocharger Configuration
- Attach a suitable lifting device to control module (1). The weight of control module (1) is approximately
998 kg (2200 lb) . - Disconnect line (2), and line (3)
Show/hide table
Illustration 2 g06146153 Turbochargers not shown for clarity purposes. - Remove bolts (4), bolts (5), and bolts (7) from both sides of the module.
- Remove clamps (6).
Show/hide table
Illustration 3 g06149617 - Remove clamps (8).
Show/hide table
Illustration 4 g06149619 - Remove bolts (9).
- Remove air inlet and exhaust module (1).
- Repeat Step 2 through Step 7 for the remaining air inlet and exhaust module (1).
Show/hide table
Illustration 1 | g06146144 |
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Daily Inspection
New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620} New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620}
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Canopy
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U} A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408} Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408}
3512E Engines for Caterpillar Built Machines Electronic Control Module (Engine) - Remove and Install
New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057} New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057}
730 and 735 Articulated Truck Systems Location of Components (Steering System)
730C2 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499} New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499}
The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269} The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269}
Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304} Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304}
994K Wheel Loader Machine Systems Brake Control Valve (Parking) - Remove and Install
PM820, PM822, and PM825 Cold Planer Rotor Cutter Bits - Inspect/Replace - Drum with Three-Piece Rotor Bits
559D, 579D Knuckleboom Loader Circuit Breakers - Reset
3512E Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620} Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620}
® Control System for Landfill Compactors General Information
793F Off-Highway Truck Autonomous Lockout Control - If Equipped
793F Off-Highway Truck Camera - If Equipped
3512E Engines for Caterpillar Built Machines Water Pump - Remove
® Control System for Landfill Compactors Features
3512E Engines for Caterpillar Built Machines Water Pump - Install
® Control System for Landfill Compactors System Components