Daily Inspection
Show/hide table
注意事項 |
---|
機器上聚積潤滑脂和機油有引起火災的危險。 每隔1000小時或每次有大量機油潑灑在機器上時,請使用蒸氣清潔或高壓水清除這些殘渣。 |
請參閱保養手冊以瞭解詳細的步驟。 請參閱保養週期計劃表以瞭解完整的計劃保養清單。
Show/hide table
柴油引擎排放的廢氣包含可能有害健康的燃燒產物 確保在通風良好的地方操作引擎,如果位於封閉空間之內,請將廢氣排到空間外。 |
降下機器,直到轉子位於地面為止。
如欲使機器能達到最長的使用壽命,務必對機器進行巡覽檢查。 請先進行巡覽檢查,再登上機器。 請先進行巡覽檢查,再起動引擎。
查看機器四周和下方,確定是否有鬆動的螺栓、垃圾、機油洩漏、冷卻液洩漏、破損或磨損零件等項目。 檢查附件的狀況。 檢查履帶與液壓組件的狀況。 進行任何必要的維修。
Caterpillar Information System:
New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620} New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620}
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Canopy
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U} A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408} Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408}
3512E Engines for Caterpillar Built Machines Electronic Control Module (Engine) - Remove and Install
New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057} New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057}
730 and 735 Articulated Truck Systems Location of Components (Steering System)
730C2 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499} New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499}
The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269} The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269}
Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304} Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304}
730C2 Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
C175-20 High Altitude Engine for Caterpillar Built Machines Air Inlet and Exhaust Module - Remove - Eight Turbocharger Configuration
994K Wheel Loader Machine Systems Brake Control Valve (Parking) - Remove and Install
PM820, PM822, and PM825 Cold Planer Rotor Cutter Bits - Inspect/Replace - Drum with Three-Piece Rotor Bits
559D, 579D Knuckleboom Loader Circuit Breakers - Reset
3512E Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620} Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620}
® Control System for Landfill Compactors General Information
793F Off-Highway Truck Autonomous Lockout Control - If Equipped
793F Off-Highway Truck Camera - If Equipped
3512E Engines for Caterpillar Built Machines Water Pump - Remove
® Control System for Landfill Compactors Features
3512E Engines for Caterpillar Built Machines Water Pump - Install