Exhaust Elbow - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
Start By:
- Remove the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately
28 kg (63 lb) . - Remove bolts (2). Lift exhaust elbow (1) from the engine.
- Repeat the procedure on the second exhaust elbow.
Show/hide table
Illustration 1 | g06146192 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
B | Loctite C5-A Copper Anti-Seize Lubricant
Loctite 8008(1) |
- |
Show/hide table
(1) | EAME Alternative |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately
28 kg (63 lb) . Position exhaust elbow (1). - Apply Tooling (B) to bolts (2). Install bolts (2).
- Repeat the procedure on the second exhaust elbow.
Show/hide table
Illustration 2 | g06146192 |
End By:
- Install the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar Information System:
559D, 579D Knuckleboom Loader Circuit Breakers - Reset
PM820, PM822, and PM825 Cold Planer Rotor Cutter Bits - Inspect/Replace - Drum with Three-Piece Rotor Bits
994K Wheel Loader Machine Systems Brake Control Valve (Parking) - Remove and Install
C175-20 High Altitude Engine for Caterpillar Built Machines Air Inlet and Exhaust Module - Remove - Eight Turbocharger Configuration
PM310, PM312, and PM313 Cold Planer Daily Inspection
New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620} New Power Train (Transmission) Software Is Now Used on Certain 793F Large Off-Highway Trucks {4800, 4808, 7490, 7610, 7620}
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Canopy
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U} A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408} Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408}
3512E Engines for Caterpillar Built Machines Electronic Control Module (Engine) - Remove and Install
New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057} New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057}
730 and 735 Articulated Truck Systems Location of Components (Steering System)
Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620} Procedure to Update the Multifunction Display Application File of Certain Telehandlers {7610, 7620}
® Control System for Landfill Compactors General Information
793F Off-Highway Truck Autonomous Lockout Control - If Equipped
793F Off-Highway Truck Camera - If Equipped
3512E Engines for Caterpillar Built Machines Water Pump - Remove
® Control System for Landfill Compactors Features
3512E Engines for Caterpillar Built Machines Water Pump - Install
® Control System for Landfill Compactors System Components
559D and 579D Knuckleboom Loaders Solenoid Valve - Test
MH3037 Material Handler Engine Supplement Exhaust Back Pressure Valve - Remove and Install
CP44B and CS44B Vibratory Soil Compactor Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove and Install
MH3037 Material Handler Engine Supplement Exhaust Manifold - Remove and Install