Water Pump
Show/hide table
Illustration 1 | g01197373 |
The impeller cover is not shown. |
(1) Clearance between the impeller and the housing ... 0.75 ± 0.25 mm (0.030 ± 0.010 inch)
(2) Seal
(3) Height of seal ... 12.83 ± 0.13 mm (0.505 ± 0.005 inch)
(4) The filter should not extend beyond the surface of the housing.
(5) Dimension from the front face of the pulley to the face of the housing ... 103.8 ± 0.3 mm (4.09 ± 0.01 inch)
Caterpillar Information System:
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Engine Oil Pressure
3126B Engine for Caterpillar Built Machines Engine Oil Pump
G3612 and G3616 Engines Lubrication System
3406C (PEEC III) Truck Engines Brakesaver
3126B Marine Engine Cylinder Head
3208 Marine Engine Engine Shutoffs and Engine Alarms
G3612 and G3616 Engines Fuel System
3126B and 3126E Truck Engines Electronic Control Wiring Group
3126B and 3126E Truck Engines Air Inlet Heater
G3612 and G3616 Engines Abbreviations and Symbols
C-9 Industrial Engine Alternator and Regulator
3126 Truck Engine Air Compressor - Bendix Tu-Flo Air Compressors
G3612 and G3616 Engines Basic Block
3054 Engine Alternator and Regulator
3054 Engine Fuel Injection Pump
3126B and 3126E Truck Engines Belt Tightener
3126 Industrial Engine Fan Drive Mounting Group
G3612 and G3616 Engines Before Starting Engine
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cooling System Coolant (ELC) - Change
3126B Engine for Caterpillar Built Machines Cylinder Block
G3612 and G3616 Engines Starting the Engine
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cooling System Coolant Extender (ELC) - Add
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Junction Box and Enclosure Group
G3612 and G3616 Engines After Starting Engine