Belt Tightener
Show/hide table
Illustration 1 | g01156570 |
(1) Distance from the back of the plate assembly to the middle of the pulley ... 26.0 ± 0.3 mm (1.02 ± 0.01 inch)
(2) Distance from the back of the plate assembly to the back of the pulley ... 16 mm (0.63 inch)
(3) Plate assembly
(4) Pulley
(5) Apply 9S-3263 Thread Lock Compound to the pulley bore before assembly.
Caterpillar Information System:
3054 Engine Fuel Injection Pump
3054 Engine Alternator and Regulator
G3612 and G3616 Engines Basic Block
3126B and 3126E Truck Engines Water Pump
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Engine Oil Pressure
3126B Engine for Caterpillar Built Machines Engine Oil Pump
G3612 and G3616 Engines Lubrication System
3406C (PEEC III) Truck Engines Brakesaver
3126B Marine Engine Cylinder Head
3208 Marine Engine Engine Shutoffs and Engine Alarms
G3612 and G3616 Engines Fuel System
3126B and 3126E Truck Engines Electronic Control Wiring Group
3126 Industrial Engine Fan Drive Mounting Group
G3612 and G3616 Engines Before Starting Engine
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cooling System Coolant (ELC) - Change
3126B Engine for Caterpillar Built Machines Cylinder Block
G3612 and G3616 Engines Starting the Engine
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cooling System Coolant Extender (ELC) - Add
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Junction Box and Enclosure Group
G3612 and G3616 Engines After Starting Engine
Removal And Installation Instructions For The HEUI Injector{1290} Removal And Installation Instructions For The HEUI Injector{1290}
3126B Engine for Caterpillar Built Machines Crankshaft
3126B and 3126E Truck Engines Crankshaft Pulley
G3612 and G3616 Engines Manual Stop Procedure