Fuel and Auxiliary Water Pump Drive - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3940 | Bracket As | 1 |
B | 1P-0520 | Driver Gp | 1 |
Start By:
- Remove the fuel pump. Refer to Disassembly and Assembly, "Fuel Pump (Manifold) - Remove and Install".
- Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
- Attach Tooling (A) and a suitable lifting device onto housing (1). The weight of housing (1) is approximately
23 kg (50 lb) . Remove bolts (2). Remove housing (1).Show/hide tableIllustration 2 g01213648 - Remove O-ring seals (3) from housing (1).
Show/hide table
Illustration 3 g01213659 - Use Tooling (B) and a suitable press to remove bearing (4) from housing (1).
Show/hide table
Illustration 4 g06095574 - Remove the fuel and auxiliary water pump drive gear (5).
Show/hide table
Illustration 5 g01215057 - Remove bolts (6). Remove adapter (7).
Show/hide table
Illustration 6 g01215060 - Remove O-ring seals (8) and (9).
Show/hide table
Illustration 7 g01215061 - Use Tooling (B) and a suitable press to remove bearing (10) from adapter (7).
Show/hide table
Illustration 1 | g06095573 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3940 | Bracket As | 1 |
B | 1P-0520 | Driver Gp | 1 |
- Use Tooling (B) and a suitable press to install bearing (10) into adapter (7).
Show/hide table
Illustration 9 g01215060 Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
- Install O-ring seals (8) and (9).
Show/hide table
Illustration 10 g01215057 - Install adapter (7). Install bolts (6).
Show/hide table
Illustration 11 g06095574 - Install the fuel and auxiliary water pump drive gear (5).
Show/hide table
Illustration 12 g01213693 - Use Tooling (B) and a suitable press to install bearing (4) into housing (1).
Show/hide table
Illustration 13 g01213648 Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
- Install O-ring seals (3) into housing (1).
Show/hide table
Illustration 14 g06095573 - Attach Tooling (A) and a suitable lifting device onto housing (1). The weight of housing (1) is approximately
23 kg (50 lb) . Position housing (1). Install bolts (2).
Show/hide table
Illustration 8 | g01215071 |
End By:
- Install the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Install".
- Install the fuel pump. Refer to Disassembly and Assembly, "Fuel Pump (Manifold) - Remove and Install".
Caterpillar Information System:
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801} Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801}
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Assemble - Without Brakes
New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168} New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168}
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Disassemble - Without Brakes
2570D, 2670D Wheel Feller Buncher Hydraulic System Oil - Change
An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302} An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900} A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408} A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408}
814K Wheel Dozer Machine Systems Piston Pump (Implement) - Remove and Install
Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263} Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Steering System)
785G Off-Highway Truck/Tractor Electrical and Hydraulic Systems Brakes Drag
14M Series 3 Motor Grader Lifting and Tying Down the Machine
745 and 740 GC & 740 EJECTOR Articulated Truck Systems System Schematic
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
14M3 Motor Grader Engine Supplement Manifold (Diesel Exhaust Fluid) - Remove and Install
M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706} M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706}
A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353} A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353}
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
New Gas Spring and Gusset Plate Are Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7308} New Gas Spring and Gusset Plate Are Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7308}
New Hose Assemblies Are Now Used on Certain 424B and 424B HD Backhoe Loaders {5057} New Hose Assemblies Are Now Used on Certain 424B and 424B HD Backhoe Loaders {5057}