Auxiliary Water Pump - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 1P-0510 | Driver Gp | 1 |
C | 207-1601 | Rubber Lubricant | 1 |
D | 325–5756 | Seal Tool | 1 |
- Do not lubricate the sealing lip of seal (10). Install ring assembly (11). Use Tooling (B) to install seal (10).
Show/hide table
Illustration 2 g01207696 - Install shaft (7) with thrust washer (9) into water pump (3). Install bolts (8).
Show/hide table
Illustration 3 g06095541 - Turn over water pump (3). Use water or Tooling (C) to aid assembly. Use a press and Tooling (D) to install a new seal assembly (12) over shaft (7) and into housing (3). Ensure that the outer shell of the seal is fully seated in the housing.
Show/hide table
Illustration 4 g01207798 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Lubricate shaft (7) with clean engine oil. Use Tooling (B) and a suitable press to install impeller (5) onto shaft (7). Install impeller (5) until impeller (5) is flush to ±
0.15 mm (0.006 inch) with shaft (7).Show/hide tableIllustration 5 g01204935 Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
- Install O-ring seal (4) onto cover (2).
Show/hide table
Illustration 6 g01204934 - Install cover (2) onto water pump (3). Install nuts (1).
Show/hide table
Illustration 1 | g01207698 |
End By:
- Install the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Install".
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Assemble - Without Brakes
New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168} New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168}
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Disassemble - Without Brakes
2570D, 2670D Wheel Feller Buncher Hydraulic System Oil - Change
An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302} An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900} A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408} A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408}
814K Wheel Dozer Machine Systems Piston Pump (Implement) - Remove and Install
814K Wheel Dozer Machine Systems Gear Pump (Charge) - Remove and Install
814K Wheel Dozer Machine Systems Piston Pump (Steering) - Remove and Install
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Charging System - Test
Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801} Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263} Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Steering System)
785G Off-Highway Truck/Tractor Electrical and Hydraulic Systems Brakes Drag
14M Series 3 Motor Grader Lifting and Tying Down the Machine
745 and 740 GC & 740 EJECTOR Articulated Truck Systems System Schematic
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
14M3 Motor Grader Engine Supplement Manifold (Diesel Exhaust Fluid) - Remove and Install
M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706} M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706}
A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353} A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353}