A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} Caterpillar


A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}

Usage:

793B 1HL
Engine
3500 and G3500 Engines

Description Of Change: A new sealed insert which utilizes an edge bonded rubber seal has been introduced to replace the current liner inserts.

Adaptable To: Sealing insert kits 473-0493 and 473-0494 which will be used in place of former inserts.

Refer to Reuse and Salvage Guidelines, SEBF8255, "Procedure to Salvage Cylinder Blocks of 3500 Engines" for application and installation information.

Note: Serviced only as a kit containing one insert, and one seal, individual seals are not available, and these new parts must be used as a set. 489-0635 Tool As has been released to install the new inserts.

The sealed inserts were implemented in 3500 Series Cat Remanufactured Engines in October 2015, for blocks that were salvaged with inserts.



Illustration 1g06105139


Illustration 2g06105141

Caterpillar Information System:

Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801} Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801}
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Assemble - Without Brakes
New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168} New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168}
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Disassemble - Without Brakes
2570D, 2670D Wheel Feller Buncher Hydraulic System Oil - Change
An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302} An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900} A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408} A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408}
814K Wheel Dozer Machine Systems Piston Pump (Implement) - Remove and Install
814K Wheel Dozer Machine Systems Gear Pump (Charge) - Remove and Install
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263} Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Steering System)
785G Off-Highway Truck/Tractor Electrical and Hydraulic Systems Brakes Drag
14M Series 3 Motor Grader Lifting and Tying Down the Machine
745 and 740 GC & 740 EJECTOR Articulated Truck Systems System Schematic
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
14M3 Motor Grader Engine Supplement Manifold (Diesel Exhaust Fluid) - Remove and Install
M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706} M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706}
A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353} A New Radiator Core Assembly is Now Available for Certain 773E Off-Highway Trucks {1353}
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
New Gas Spring and Gusset Plate Are Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7308} New Gas Spring and Gusset Plate Are Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7308}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.