Auxiliary Water Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9895 | Crossblock | 1 |
1P-0820 | Hydraulic Puller | 1 | |
126-7181 | Sliding Plate | 2 | |
3H-0465 | Push-Puller Plate | 6 | |
2S-4680 | Stud | 2 | |
3S-6224 | Electric Hydraulic Pump Gp | 1 | |
2L-4523 | Bolt | 2 | |
5P-8244 | Hard Washer | 2 | |
6B-6682 | Full Nut | 2 | |
2J-3506 | Full Nut | 2 |
Start By:
- Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
- Remove nuts (1). Remove cover (2) from water pump (3).
Show/hide table
Illustration 2 g01204935 - Remove O-ring seal (4) from cover (2).
Show/hide table
Illustration 3 g01207677 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) in order to remove impeller (5).
Show/hide table
Illustration 4 g01207696 - Turn over water pump (3). Remove bolts (8). Remove shaft (7) and thrust washer (9). When you remove shaft (7) the seal ring will be free from shaft (7).
Show/hide table
Illustration 5 g01207698 - Remove seal (10) and ring assembly (11).
Show/hide table
Illustration 6 g06095514 - Turn over water pump (3). Remove seal assembly (12).
Show/hide table
Illustration 1 | g01204934 |
Caterpillar Information System:
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Assemble - Without Brakes
New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168} New Procedure For Replacing the Camlock Connectors On the Diesel Exhaust Fluid Control Unit (DCU) For Certain Machine Engines {108H, 1408, 3168}
CP34 and CS34 Vibratory Soil Compactors Machine Systems Differential - Disassemble - Without Brakes
2570D, 2670D Wheel Feller Buncher Hydraulic System Oil - Change
An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302} An Improved Engine Oil Pan is Now Used on Certain 797 and 797B Machine Engines {1302}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900} A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408} A New Position Switch Is Used in the Left Console on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {1408}
814K Wheel Dozer Machine Systems Piston Pump (Implement) - Remove and Install
814K Wheel Dozer Machine Systems Gear Pump (Charge) - Remove and Install
814K Wheel Dozer Machine Systems Piston Pump (Steering) - Remove and Install
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Charging System - Test
A New Fuel Tank Gp Is Now Used on Certain Telehandlers {1273} A New Fuel Tank Gp Is Now Used on Certain Telehandlers {1273}
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801} Noise From the Power Train May Be Noticed in Certain 700 C-Series Articulated Trucks {3264, 4801}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263} Procedure to Rework the Brake Accumulators on R1600H Load Haul Dump Machines {4263}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Steering System)
785G Off-Highway Truck/Tractor Electrical and Hydraulic Systems Brakes Drag
14M Series 3 Motor Grader Lifting and Tying Down the Machine
745 and 740 GC & 740 EJECTOR Articulated Truck Systems System Schematic
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
14M3 Motor Grader Engine Supplement Manifold (Diesel Exhaust Fluid) - Remove and Install
M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706} M0073882: 502-0889 C175 Common Rail Assembly and Flushing Group {0706}