Flywheel
Show/hide table
Illustration 1 | g00289776 |
Refer to Testing And Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Dash marks
Note: When the flywheel is installed, put the dash mark on the flywheel near the pilot bore in alignment with the dash mark on the crankshaft.
(2) Put 4C-5593 Anti-Seize Compound on the washer face and the bolt threads. Tighten the bolts to the following torque. ... 700 ± 30 N·m (520 ± 22 lb ft)
Tighten the bolts to an additional 180 ± 7 degrees.
(3) Install the ring gear on the flywheel with the chamfer in the ring gear toward the engine.
Caterpillar Information System:
3406E Truck Engine Fan Drive
3406E Truck Engine Engine to Transmission Adapter
3618 Engine Engine Lifting Bracket
G3612 and G3616 Engines Digital Sensor
3406C (PEEC III) Truck Engine Alternator
G3612 and G3616 Engines Speed Sensor
3618 Engine Auxiliary Water Pump
3208 Marine Engine Engine Oil and Filter - Change
3612 and 3616 Engines Air Cleaner Adapter
G3612 and G3616 Engines Detonation Sensor
G3612 and G3616 Engines Pressure Sensor
G3612 and G3616 Engines Pressure Sensor
3618 Engine Camshaft
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Reference Material
3406E Truck Engine Atmospheric Pressure Sensor
G3606 and G3608 Engines Air Lines - Choke
3612 and 3616 Engines Valve Mechanism
SPS342 Skid Mounted Pumper Fuel System - Prime
3618 Engine Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
3406E Truck Engines General Information
G3612 and G3616 Engines Electronic Control (Combustion Sensor)
3176B Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
G3606 and G3608 Engines Gas Engine Ignition
3618 Engine Cylinder Block