3618 Engine Caterpillar


Engine Air Cleaner Element - Replace

Usage:

3618 2MW

Replace the Soot Filter


NOTICE

Never run the engine without an air cleaner element installed. Never run the engine with a damaged air cleaner element. Do not use air cleaner elements with damaged pleats, gaskets or seals. Dirt entering the engine causes premature wear and damage to engine components. Air cleaner elements help to prevent airborne debris from entering the air inlet.


Unfiltered air will drastically accelerate internal engine wear. The air silencer is wrapped in a disposable soot filter. The soot filter helps prevent airborne dust and debris from entering the air inlet. As the soot filter becomes dirty, the air restriction increases. Replace the soot filter when the air restriction reaches 3.75 kPa (15 inches of water).


NOTICE

Never service the air cleaner element with the engine running since this will allow dirt to enter the engine.


  1. Remove the used soot filter from the air silencer. Discard the used soot filter.

  1. Inspect the air silencer. Clean the air silencer, if necessary.

  1. Install a new soot filter.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.