Engine and Marine Transmission Operation
变速器选档手柄
动力从发动机通过船用变速器传递到螺旋桨轴上。 船用变速器可使用下列方式来操纵:
- 机械
- 液压
- 气动
- 电气
一个控制阀将油流导向前进档离合器或倒档离合器。 控制阀由变速器选档手柄操纵。 变速器选档手柄可手动操纵或远程操纵。
通常船用变速器在驾驶舱操纵。 驾驶舱的操纵机构必须经过调整,以便允许变速器选档手柄能够全行程移动。 这样做也将允许离合器片能够完全接合。
当远程操纵机构经过正确调整之后,就不需要进行定期离合器调整了。
移动和起航
为获得最佳性能和最长使用寿命,应以下述方式来进行变速器换档:
- 将船用变速器选档手柄完全接入行进方向。
- 等待至少3秒钟以便在提高发动机转速之前使离合器能够彻底接合。
- 逐渐升高发动机转速。
Show/hide table
注意 |
---|
只应在发动机运转时才可以操作船用变速器操控装置。 发动机不在运转时与一个接合的离合器一起旋转的螺旋桨轴得不到足够的润滑,可能会受到损坏。 |
低船速模式
关于发动机的特点和控制功能的更多资料,请参阅操作和保养手册。
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Engine Operation - Hydrocarbon Mitigation
330B Excavator Machine System Specifications Hoist Solenoid Valve - Pilot Lines
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Valve Lash - Check
330B Excavator Machine System Specifications Flow Control Valve
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package After Starting Engine
3208 Marine Engine Starting with Jump Start Cables
3176C and 3196 Industrial Engines Starting the Engine
3176C and 3196 Industrial Engines Cold Weather Starting
3208 Marine Engine Before Starting Engine
3176C and 3196 Marine Engines Engine Operation with Active Diagnostic Codes
3126E and 3126B Commercial and Truck Engines Fault Logging
3176C and 3196 Marine Engines Diagnostic Flash Code Retrieval
C12 Marine Engines Trolling
3208 Marine Engine Full Load Operation
3208 Marine Engine Docking or Reversing Travel Direction
3208 Marine Engine Fuel Conservation Practices
3208 Marine Engine Emergency Stopping
3116 and 3126 Marine Engines Manual Stop Procedure
3208 Marine Engine After Stopping Engine
3208 Marine Engine Fuel and the Effect from Cold Weather
3176C and 3196 Industrial Engines Fuel Related Components in Cold Weather
3176C and 3196 Industrial Engines Air Starting
3176C and 3196 Industrial Engines Overspeed
3176B Industrial Engine Speed Sensing Loss Alarm