Air Starting
为使空气起动马达具有良好的使用寿命，其供气必须无脏物和水。
- 打开和关闭放泄阀，以便放掉凝结水和携带的机油。 该放泄阀位于压缩空气罐的底部。
- 检查供气压力。 空气起动马达要求空气压力最低为690 kPa (100 psi)，以便正常工作。 空气压力最高不得超过1550 kPa (225 psi)。 正常空气压力为758至965 kPa (110至140 psi)。
- 按压空气阀或发动机的起动按钮，以便起动盘机。 发动机起动后，应释放空气阀或起动按钮。
Show/hide table
 | |
| 图 1 | g00738000 |
(1) 空气阀 | |
Caterpillar Information System:
3176C and 3196 Industrial Engines Fuel Related Components in Cold Weather
3208 Marine Engine Fuel and the Effect from Cold Weather
3208 Marine Engine After Stopping Engine
3116 and 3126 Marine Engines Manual Stop Procedure
3208 Marine Engine Emergency Stopping
3208 Marine Engine Fuel Conservation Practices
3208 Marine Engine Docking or Reversing Travel Direction
3208 Marine Engine Full Load Operation
C12 Marine Engines Trolling
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine and Marine Transmission Operation
C15 and C18 Petroleum Generator Sets Engine Operation - Hydrocarbon Mitigation
330B Excavator Machine System Specifications Hoist Solenoid Valve - Pilot Lines
3176C and 3196 Industrial Engines Overspeed
3176B Industrial Engine Speed Sensing Loss Alarm
3176C and 3196 Industrial Engines Engine Shutoff Control
3176C and 3196 Industrial Engines Cold Start Strategy
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Trolling Mode Strategy
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Slow Vessel Mode
3176C and 3196 Industrial Engines Engine Speed Governing
C12 Marine Engines Throttle Position Sensor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Synchronization
3208 Marine Engine Marine Engine Performance Analysis Report (PAR)
322B Excavator Machine System Attachment Specifications Bucket Cylinder Lines
3176C and 3196 Marine Engines Reference Material