Trolling Mode Strategy
该策略限制发动机转速,以此来帮助避免在拖曳期间变速器载荷过大。
拖曳期间,将发动机油门移动到全油门将导致发动机转速从可编程设置的低怠速转速变为最高可编程设置拖曳转速。 最高可编程设置拖曳转速是一个用户规定参数。
Show/hide table
可编程设置范围     | ||
最低     | 默认值     | 最高     |
900 转/分     | 900 转/分     | 1200 转/分     |
拖曳模式只在发动机转速处于编程设置的低怠速发动机转速的50 rpm范围内时由电控模块(ECM)加以激活或去激活。 拖曳模式也可在发动机不在运转状态时被激活。
Caterpillar Information System:
3176C and 3196 Industrial Engines Cold Start Strategy
3176C and 3196 Industrial Engines Engine Shutoff Control
3176B Industrial Engine Speed Sensing Loss Alarm
3176C and 3196 Industrial Engines Overspeed
3176C and 3196 Industrial Engines Air Starting
3176C and 3196 Industrial Engines Fuel Related Components in Cold Weather
3208 Marine Engine Fuel and the Effect from Cold Weather
3208 Marine Engine After Stopping Engine
3116 and 3126 Marine Engines Manual Stop Procedure
3208 Marine Engine Emergency Stopping
3208 Marine Engine Fuel Conservation Practices
3208 Marine Engine Docking or Reversing Travel Direction
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Slow Vessel Mode
3176C and 3196 Industrial Engines Engine Speed Governing
C12 Marine Engines Throttle Position Sensor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Synchronization
3208 Marine Engine Marine Engine Performance Analysis Report (PAR)
322B Excavator Machine System Attachment Specifications Bucket Cylinder Lines
3176C and 3196 Marine Engines Reference Material
3208 Marine Engine Additional Reference Material
322B Excavator Machine System Attachment Specifications Track Shoe Bolts
322B, 322B L, 325B and 325B L Excavators Freezing Conditions
3176C and 3196 Marine Engines Sensors and Electrical Components
320B, 322B and 325B Excavators Quick Coupler - Lubricate - If Equipped