Axle (Front) - Remove and Install
Start By:
- Remove the wheel and tire. Refer to Disassembly and Assembly, "Wheel and Tire - Remove and Install".
- Place a suitable lifting device under axle (1). The weight of the axle (1) is approximately
36 kg (80 lb) . - Remove bolt (2), the washer, pin assembly (3), and axle (1).
Show/hide table
| |
| Illustration 1 | g03876258 |
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite 7649 | 1 |
| B | - | Loctite 242 | 1 |
- Install axle (1) in reverse order of removal.
- Apply Tooling (A) and Tooling (B) to bolt (2).
End By:
- Install the wheel and tire. Refer to Disassembly and Assembly, "Wheel and Tire - Remove and Install".
Caterpillar Information System:
SE34 V and SE34 VT Asphalt Screeds Access Doors and Covers
2015/07/27 Improved Bracket Clearance with Fuel Tank Is Now Available For Certain 797FOff-Highway Trucks {7050, 7050}
415F2 Industrial Loader Towing the Machine
SE34 V and SE34 VT Asphalt Screeds Lifting and Tying Down the Machine
415F2 Industrial Loader Monitoring System
SE34 V and SE34 VT Asphalt Screeds Thickness Control Screw Adjustment
R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000} R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000}
Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439} Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Hydraulic Control Valve - Remove and Install
994K Wheel Loader Machine Systems Transmission Planetary
AP500F Asphalt Paver Propel System Relief Valve (Charge) - Test and Adjust - Left Propel
SE34 V and SE34 VT Asphalt Screeds Plate Locations and Film Locations
SE34 V and SE34 VT Asphalt Screeds Screed - Lubricate
Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606} Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606}
MD6200 Rotary Drill Air Compressor Oil Separator Filter - Replace - High Pressure - If Equipped
2015/08/24 A New Spring for the Belt Tensioner Is Now Used In the Fan Drive Group on Certain 773E Off-Highway Trucks {1357, 1358, 1359, 1397}
PL72 Pipelayers Power Train Transmission - Remove and Install
415F2 Industrial Loader Rollover Protective Structure (ROPS) - Inspect
CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Electronic Control System Electrical Power Supply - Test
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Clean Emissions Module - Remove and Install
AP500F Asphalt Paver Propel System Pressure Limiter Valve - Test and Adjust - Right Propel
CW16 Pneumatic Compactor Machine Systems Wheel and Tire - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Tank - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Spray Pump - Remove and Install