A New Spring for the Belt Tensioner Is Now Used In the Fan Drive Group on Certain 773E Off-Highway Trucks {1357, 1358, 1359, 1397}
- Off-Highway Truck:
- 773D (S/N: NBJ1-UP)
- 773E (S/N: KEG1-UP; ASK1-UP)
Description of Change: The new open coil spring design provides better retention and eliminates any interference hence the service life is improved.
Adaptable To:
Show/hide table
Illustration 1 | g03867563 |
Front view |
Show/hide table
Illustration 2 | g03869399 |
Detailed view of area A |
The new 462-0437 Spring (1) is a direct replacement for the former 125-5071 Spring in the 387-6765 Fan Drive Gp
The new 462-0437 Spring is adaptable to the machines and effective in production with the machines that are listed in Table 1.
Show/hide table
Sales Model     | Adaptable to Machines     | Effective in Production with Machines     |
773D     | S/N:NBJ1-UP     | -     |
773E     | S/N:ASK1-1315     | S/N:ASK1316-UP     |
S/N:KEG1-345 | S/N:KEG346-UP     |
Caterpillar Information System:
MD6200 Rotary Drill Air Compressor Oil Separator Filter - Replace - High Pressure - If Equipped
Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606} Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606}
SE34 V and SE34 VT Asphalt Screeds Screed - Lubricate
CW16 Pneumatic Compactor Machine Systems Axle (Front) - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Access Doors and Covers
2015/07/27 Improved Bracket Clearance with Fuel Tank Is Now Available For Certain 797FOff-Highway Trucks {7050, 7050}
415F2 Industrial Loader Towing the Machine
SE34 V and SE34 VT Asphalt Screeds Lifting and Tying Down the Machine
415F2 Industrial Loader Monitoring System
SE34 V and SE34 VT Asphalt Screeds Thickness Control Screw Adjustment
R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000} R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000}
Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439} Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439}
PL72 Pipelayers Power Train Transmission - Remove and Install
415F2 Industrial Loader Rollover Protective Structure (ROPS) - Inspect
CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Electronic Control System Electrical Power Supply - Test
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Clean Emissions Module - Remove and Install
AP500F Asphalt Paver Propel System Pressure Limiter Valve - Test and Adjust - Right Propel
CW16 Pneumatic Compactor Machine Systems Wheel and Tire - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Tank - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Spray Pump - Remove and Install
CW16 Pneumatic Compactor Machine Systems Spray Bar - Remove and Install
CW16 Pneumatic Compactor Machine Systems Piston Pump (Propel) - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Screed - Check/Adjust
CW16 Pneumatic Compactor Machine Systems Metering Pump (Steering) - Remove and Install