415F2 Industrial Loader Caterpillar


Rollover Protective Structure (ROPS) - Inspect

Usage:

415F2 IL PF4


Illustration 1g03865613

  1. Inspect the ROPS for loose bolts or for damaged bolts. Replace any damaged bolts or missing bolts with original equipment parts only.

    Tighten the M20 bolts (1) to a torque of 460 ± 60 N·m (339 ± 44 lb ft). Tighten the M16 bolts (2) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).

    Note: Apply oil to all ROPS bolt threads before you install the bolts. Failure to apply oil to the bolt threads can result in improper bolt torque.

  2. Operate the machine on a rough surface. Replace the ROPS mounting supports if the ROPS emits a noise. Replace the ROPS mounting supports if the ROPS rattles.

Do not straighten the ROPS. Do not repair the ROPS by welding reinforcement plates to the ROPS.

Consult your Cat dealer for repair of any cracks in the ROPS.

Caterpillar Information System:

PL72 Pipelayers Power Train Transmission - Remove and Install
2015/08/24 A New Spring for the Belt Tensioner Is Now Used In the Fan Drive Group on Certain 773E Off-Highway Trucks {1357, 1358, 1359, 1397}
MD6200 Rotary Drill Air Compressor Oil Separator Filter - Replace - High Pressure - If Equipped
Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606} Dealer Services Portal Provides No Feedback on Subscription Requests or Successes{7606}
SE34 V and SE34 VT Asphalt Screeds Screed - Lubricate
CW16 Pneumatic Compactor Machine Systems Axle (Front) - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Access Doors and Covers
2015/07/27 Improved Bracket Clearance with Fuel Tank Is Now Available For Certain 797FOff-Highway Trucks {7050, 7050}
415F2 Industrial Loader Towing the Machine
SE34 V and SE34 VT Asphalt Screeds Lifting and Tying Down the Machine
415F2 Industrial Loader Monitoring System
SE34 V and SE34 VT Asphalt Screeds Thickness Control Screw Adjustment
CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Electronic Control System Electrical Power Supply - Test
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Clean Emissions Module - Remove and Install
AP500F Asphalt Paver Propel System Pressure Limiter Valve - Test and Adjust - Right Propel
CW16 Pneumatic Compactor Machine Systems Wheel and Tire - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Tank - Remove and Install
CW16 Pneumatic Compactor Machine Systems Water Spray Pump - Remove and Install
CW16 Pneumatic Compactor Machine Systems Spray Bar - Remove and Install
CW16 Pneumatic Compactor Machine Systems Piston Pump (Propel) - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Screed - Check/Adjust
CW16 Pneumatic Compactor Machine Systems Metering Pump (Steering) - Remove and Install
CW16 Pneumatic Compactor Machine Systems Hydraulic Tank - Remove and Install
CW16 Pneumatic Compactor Machine Systems Hydraulic Oil Filter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.