Fuel Tank
Show/hide table
Illustration 1 | g03832775 |
Show/hide table
Specification for 361-8000 Fuel Tank Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 5     | 7I-2272 Bolt     | Torque to 3.3 ± 0.7 N·m (29.2 ± 6.2 lb in).     |
2     | 6     | 8T-4195 Bolt     | Torque to 30 ± 7 N·m (266 ± 62 lb in).     |
3     | 1     | 350-7735 Cap Filter Kit     | Torque to 0.6 to 1.0 N·m (5.3 to 8.9 lb in).     |
4     | 1     | 259-7138 Plug     | Torque to 65 ± 6 N·m (48 ± 4 lb ft).     |
Caterpillar Information System:
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Sideshift Cylinder - Mounting
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
MWL/LWL Neutralizer Valve Leakage {4330} MWL/LWL Neutralizer Valve Leakage {4330}
16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Motor Grader Automatic Lubrication System Grease - Check
16M Motor Grader Automatic Lubrication System Grease - Add
16M Series 3 and 18M Series 3 Motor Grader Systems Blade Lift Cylinder and Mounting
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818} Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818}
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Remove
2015/07/16 A New Turbine Inlet Manifold Support Bracket Is Used on C175 Off-Highway Truck Engines {1059}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
PL83 and PL87 Pipelayers Machine Systems Counterbalance Valve (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Load Sheave Block (Lower) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Gear Pump (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Main Control Valve - Remove and Install