Sliding Frame and Bearing - Remove
Start By:
- Remove the swing frame.
- Remove the swing cylinders.
- Attach a suitable lifting device to sliding frame (2). The weight of sliding frame (2) is approximately
204 kg (450 lb) . - Remove bolts (4) and bar (3). Repeat for the other side.
- Loosen bolts (1). Repeat for the other side. Remove sliding frame (2).
Show/hide table
Illustration 2 g03327991 Show/hide tableIllustration 3 g03327992 - Position sliding frame (2) onto suitable cribbing.
- Remove bolts (6) and cap (5). Remove O-ring seal (7) from cap (5).
- Remove piston (9) and lip seal (12).
- Remove wear rings (8) and (11) and piston seal (10) from piston (9).
- Remove the remaining pistons from sliding frame (2).
Show/hide table
Illustration 1 | g03327990 |
Caterpillar Information System:
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
16M Series 3 and 18M Series 3 Motor Grader Systems Fuel Tank
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Sideshift Cylinder - Mounting
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
MWL/LWL Neutralizer Valve Leakage {4330} MWL/LWL Neutralizer Valve Leakage {4330}
16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Motor Grader Automatic Lubrication System Grease - Check
16M Motor Grader Automatic Lubrication System Grease - Add
2015/07/16 A New Turbine Inlet Manifold Support Bracket Is Used on C175 Off-Highway Truck Engines {1059}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
PL83 and PL87 Pipelayers Machine Systems Counterbalance Valve (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Load Sheave Block (Lower) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Gear Pump (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Main Control Valve - Remove and Install
Check Final Drive O-Ring Seal on R2900G and R3000H LHD Machines{4050} Check Final Drive O-Ring Seal on R2900G and R3000H LHD Machines{4050}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Bypass Switch (Rear Axle Lubrication Filter)
14M3 Motor Grader Machine Systems Wheel Mounting
16M Series 3 and 18M Series 3 Motor Grader Systems Frame - Front