A New Turbine Inlet Manifold Support Bracket Is Used on C175 Off-Highway Truck Engines {1059}
- Off-Highway Truck/Tractor:
- 793FSeries AC (S/N: EMD1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
- 795FSeries AC (S/N: ERM1-UP)
- 795F (S/N: SNT1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
Description of Change: The new bracket utilizes new mounting hardware, including two support plates for an improved connection and increased durability.
Adaptable To: The new 461-6026 Bracket replaces the existing 378-8940 Bracket. The new bracket is adaptable back to first production on the serial numbers listed above.
Refer to Table 1 for a list of part numbers needed to install the new bracket.
Show/hide table
 | |
| Illustration 1 | g03833359 |
(1) 322-5830 Bolt (2) 373-9176 Spacer (3) 461-6026 Bracket (4) 461-6027 Plate (5) 099-0169 Bolt (6) 198-4768 Hard Washer | |
Show/hide table
| New Part Number | Description | Quantity |
| 099-0169 | Bolt | 2 |
| 198-4768 | Hard Washer | 2 |
| 461-6026 | Bracket | 1 |
| 461-6027 | Plate | 2 |
Show/hide table
| Effective Engine Serial Numbers |
| S/N:B7B02029-UP |
| S/N:B7C01004-UP |
| S/N:JTL01156-UP |
| S/N:LLM01462-UP |
| S/N:A4K01027-UP |
Caterpillar Information System:
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Remove
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
16M Series 3 and 18M Series 3 Motor Grader Systems Fuel Tank
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Sideshift Cylinder - Mounting
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
MWL/LWL Neutralizer Valve Leakage {4330} MWL/LWL Neutralizer Valve Leakage {4330}
16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Motor Grader Automatic Lubrication System Grease - Check
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
PL83 and PL87 Pipelayers Machine Systems Counterbalance Valve (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Load Sheave Block (Lower) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Gear Pump (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Main Control Valve - Remove and Install
Check Final Drive O-Ring Seal on R2900G and R3000H LHD Machines{4050} Check Final Drive O-Ring Seal on R2900G and R3000H LHD Machines{4050}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Bypass Switch (Rear Axle Lubrication Filter)
14M3 Motor Grader Machine Systems Wheel Mounting
16M Series 3 and 18M Series 3 Motor Grader Systems Frame - Front
422F2, 427F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Hydraulic Tank and Filter