MWL/LWL Neutralizer Valve Leakage {4330} Caterpillar


MWL/LWL Neutralizer Valve Leakage {4330}

Usage:

826K 232
Integrated Toolcarrier
IT62H (S/N: M5G1-UP)
Landfill Compactor
826H (S/N: AWF1-UP)
826K (S/N: 2321-UP; SET1-UP)
836K (S/N: LWZ1-UP; TWZ1-UP)
Soil Compactor
825K (S/N: 2331-UP; SEE1-UP)
Wheel Dozer
824K (S/N: 2341-UP; RWB1-UP)
834H (S/N: BTX1-UP)
834K (S/N: LWY1-UP; TWY1-UP)
844K (S/N: KLS1-UP)
854K (S/N: H9K1-UP; H8M1-UP)
Wheel Loader
950H (S/N: N1A1-UP; JAD1-UP; M1G1-UP; J5J1-UP; K5K1-UP; MXL1-UP; JLX1-UP)
950K (S/N: R4A1-UP; J5M1-UP; FER1-UP)
950M (S/N: EMB1-UP; XCJ1-UP; FTR1-UP)
962H (S/N: N4A1-UP; SSA1-UP; M3G1-UP; J6J1-UP; K6K1-UP; MAL1-UP; PCW1-UP)
962K (S/N: T6A1-UP; FLL1-UP; X4T1-UP)
962M (S/N: EJB1-UP; JYD1-UP; F2T1-UP)
966H (S/N: BJ61-UP; BS61-UP; A6D1-UP; RYF1-UP; A6G1-UP; A6J1-UP; TAL1-UP)
972H (S/N: GTA1-UP; LCC1-UP; A7D1-UP; NPE1-UP; A7G1-UP; A7J1-UP; WXZ1-UP)
980H (S/N: PF81-UP; MHG1-UP; A8J1-UP; KZL1-UP; JMS1-UP)
986H (S/N: L8S1-UP)
988H (S/N: A7A1-UP; BXY1-UP)
988K (S/N: LWX1-UP; TWX1-UP)
990H (S/N: BWX1-UP)
990K (S/N: DJK1-UP; A9P1-UP)
992K (S/N: 8801-UP; ZMX1-UP)
993K (S/N: Z4D1-UP; Z4Z1-UP)
994H (S/N: DWC1-UP)
994K (S/N: MM91-UP; MRK1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

The following neutralizer valves may leak at the plunger seal on certain Medium Wheel Loaders, Large Wheel Loaders, Wheel Dozers, Landfill Compactors and Soil Compactors:

Solution

Caterpillar is aware of this problem, but an interim repair has not been defined. Please replace with the same part.

Table 1
Qty  New Part Number  Description  Former Part No. 
146-7571  Steering Neutralizer Valve   
296-5662  Steering Neutralizer Valve   
315-5160  Lip Type Seal   
320-6142  Lip Type Seal   
321-5283  Steering Neutralizer Valve   
6V-1949  Lip Type Seal   

Caterpillar Information System:

16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Motor Grader Automatic Lubrication System Grease - Check
16M Motor Grader Automatic Lubrication System Grease - Add
16M Series 3 and 18M Series 3 Motor Grader Systems Blade Lift Cylinder and Mounting
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818} Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818}
16M Series 3 and 18M Series 3 Motor Grader Systems Hydraulic Tank
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
793F and 793F CMD Off-Highway Truck Power Train Bypass Switch (Rear Axle Oil Filter)
16M Series 3 and 18M Series 3 Motor Grader Systems Hydraulic Tank Mounting
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
16M Series 3 and 18M Series 3 Motor Grader Systems Sideshift Cylinder - Mounting
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Fuel Tank
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Remove
2015/07/16 A New Turbine Inlet Manifold Support Bracket Is Used on C175 Off-Highway Truck Engines {1059}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.