16M Series 3 and 18M Series 3 Motor Grader Systems Caterpillar


Blade Lift Cylinder and Mounting

Usage:

18M3 E9W



Illustration 1g03832683

Table 1
Specification for 366-6096 Blade Lift Cylinder and Mounting    
Item     Qty     Part     Specification Description    
1     As required, use shims in order to allow the socket to move freely around ball stud. Add same quantity of shims on both side of ball stud:    
8 310-5479 Shim     Thickness of one shim is
0.5 mm (0.02 inch).    
2     4     310-5480 Insert     Hand pack with 5P-0960 Grease Cartridge between inserts and ball stud.    

Caterpillar Information System:

Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818} Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818}
16M Series 3 and 18M Series 3 Motor Grader Systems Hydraulic Tank
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
793F and 793F CMD Off-Highway Truck Power Train Bypass Switch (Rear Axle Oil Filter)
16M Series 3 and 18M Series 3 Motor Grader Systems Hydraulic Tank Mounting
CB64B, CB66B and CB68B Asphalt Compactors Machine Electronic Control System Speed Sensor (Dual Signal) - Test
816K Landfill Compactor and 815K Soil Compactor Systems Solenoid Valve - Test
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Fan) - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Relief Valve (Main) - Test and Adjust - Vibratory
2015/08/05 Front Brake Cooling, and the Service and Parking Brake Lines are Improved on Certain 777G Off-Highway Trucks {0679, 1365, 4257}
16M Motor Grader Automatic Lubrication System Grease - Add
16M Motor Grader Automatic Lubrication System Grease - Check
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
MWL/LWL Neutralizer Valve Leakage {4330} MWL/LWL Neutralizer Valve Leakage {4330}
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
16M Series 3 and 18M Series 3 Motor Grader Systems Sideshift Cylinder - Mounting
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Fuel Tank
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.