Sideshift Cylinder - Mounting
Show/hide table
 | |
| Illustration 1 | g03832761 |
Show/hide table
| Specifications for 257-6804 Sideshift Cylinder and Mounting Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 5 | 112-3927 Bolt | Torque to 520 ± 70 N·m (384 ± 52 lb ft). |
| 2 | 2 | 9R-0109 Washer | As required, use only one washer obtained the nominal dimensions. |
| 3 | 1 | 166-1880 Bolt | Torque to 520 ± 70 N·m (384 ± 52 lb ft). |
Caterpillar Information System:
2015/07/08 A New Cat® Optimized Suspension Seat Is Now Available for Certain Machines {7312, 7324}
MWL/LWL Neutralizer Valve Leakage {4330} MWL/LWL Neutralizer Valve Leakage {4330}
16M Series 3 and 18M Series 3 Motor Grader Systems Centershift Cylinder and Mounting
16M Motor Grader Lubrication Pump Oil - Fill - Autolube
16M Motor Grader Automatic Lubrication System Grease - Check
16M Motor Grader Automatic Lubrication System Grease - Add
16M Series 3 and 18M Series 3 Motor Grader Systems Blade Lift Cylinder and Mounting
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818} Procedure to Install Weld-On Ground Engagement Tool (GET) Segments to 442-4005 Bucket Gp {6101, 6818}
16M Series 3 and 18M Series 3 Motor Grader Systems Hydraulic Tank
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
PL83 and PL87 Pipelayer Systems Brake Control Valve
16M Series 3 and 18M Series 3 Motor Grader Systems Fuel Tank
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Remove
2015/07/16 A New Turbine Inlet Manifold Support Bracket Is Used on C175 Off-Highway Truck Engines {1059}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Sliding Frame and Bearing - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
PL83 and PL87 Pipelayers Machine Systems Counterbalance Valve (Counterweight) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Load Sheave Block (Lower) - Remove and Install